« previous next »
Pages: 1 2 3 [4] 5 6 ... 84

Author Topic: 2015 Primitive Archer bow trade works in progress  (Read 373006 times)

0 Members and 2 Guests are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: 2015 Primitive Archer bow trade works in progress
« Reply #45 on: February 08, 2015, 09:27:10 pm »
Someone is gonna be happy happy happy! Maybe time to up the ante?
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Accipiter

  • Member
  • Posts: 246
Re: 2015 Primitive Archer bow trade works in progress
« Reply #46 on: February 08, 2015, 10:01:30 pm »
Well, I gotta represent the Pacific NW so I can say for certain that my target is going to get either a yew bow or an ocean spray bow. The question is which style? I've got material for a real long yew bow, but I've also got a take down in the works and a nice 60" piece which is just begging for some sharp curves at the end.... On the the ocean spray side I have two bendy candidates which are holding 3+ inches of natural reflex after being pulled to about 18" . I also got billets and another T/D sleeve too. Or I could pull out all the stops and use my prize 62" x 2.5" OS log for something really crazy... That one is a bit wet still, but August is a ways off.
Logged

Offline hunterbob

  • Member
  • Posts: 890
Re: 2015 Primitive Archer bow trade works in progress
« Reply #47 on: February 08, 2015, 10:29:39 pm »
Man you got alot of choices there. I have always wanted to make a bow from yew. I would like to even just feel a well made yew bow in the hand at the shot.
But anyhow nice stash you have there
Logged

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: 2015 Primitive Archer bow trade works in progress
« Reply #48 on: February 08, 2015, 11:33:24 pm »
I love what EVERYONE IS working on. I've got a few bows in the works. My recipient has made a ton of bows, so I gotta specialize or exemplify, or SOMETHING!! As I sit here in the evening glow, I wonder at what I will send, and what I will receive.
Logged
Nothing flying, Nothing dying

Offline Accipiter

  • Member
  • Posts: 246
Re: 2015 Primitive Archer bow trade works in progress
« Reply #49 on: February 09, 2015, 12:49:54 am »
Thanks Bob, I was lucky enough to find some nice pieces in the last year or so. I haven't actually made (or shot) a yew bow yet, but I'm liking it so far, seems very forgiving and is a pleasure to work with.
Logged

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: 2015 Primitive Archer bow trade works in progress
« Reply #50 on: February 09, 2015, 10:01:45 pm »
Well, I'm thinking about option 1 might be an all bamboo laminate bow, bendy handle. Option 2 may be a mulberry stave, bendy handle of course. Whichever turns out nicer I guess. Hope to get started this weekend, will post a pic or 2.

Tattoo Dave
Logged
Rockford, MI

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: 2015 Primitive Archer bow trade works in progress
« Reply #51 on: February 09, 2015, 10:13:53 pm »
Nothing like options!
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline sleek

  • Member
  • Posts: 6,764
Re: 2015 Primitive Archer bow trade works in progress
« Reply #52 on: February 09, 2015, 10:22:41 pm »
My project took a down hill turn when removing a knot ripped a gouge out the back from handle to 3" past the fade. I have never sinewed a bow and really think  it would survive without any.  However,  im gonna fille the large gouge with hide glue soaked hemp fibers, then Lebhuntfish ( Patrick ) is going to help me sinew over it, and finally black snake over that. Black snake and osage are a nice combo. The belly will be nicely toasted and going for a nice recurve to maximize the sinew. Also I have 2" reflex in the stave as she sits. Probably gonna put 4" into it. Really make that sinew work. Hope my guy is good at stringing a bow! >:D
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: 2015 Primitive Archer bow trade works in progress
« Reply #53 on: February 09, 2015, 10:30:39 pm »
I don't have a dog in this race but  Accipiter those yew look nice!!!!

I'm watching from the sidelines and will be working on one incognito.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: 2015 Primitive Archer bow trade works in progress
« Reply #54 on: February 09, 2015, 10:41:48 pm »
Sleek, sounds like he may need a bow stringer for that one! Make sure you get all the Bending and heat treating done before we sinew it! Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline sleek

  • Member
  • Posts: 6,764
Re: 2015 Primitive Archer bow trade works in progress
« Reply #55 on: February 09, 2015, 10:54:33 pm »
Yup, will do bud! Lookin forward to more shop time with you.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: 2015 Primitive Archer bow trade works in progress
« Reply #56 on: February 09, 2015, 11:00:02 pm »
I just went up and reduced the upper limb and threw it on the caul for some reflex. As the limbs aren't yet fully cured they have been reduced, and clamped down for a few weeks. Time to start back up on the juniper. I start my on call week at work tomorrow, so I will be in the shop more this week.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: 2015 Primitive Archer bow trade works in progress
« Reply #57 on: February 09, 2015, 11:14:48 pm »
Reflexed 3 staves on the caul today, dry heat. Sometimes my dry heat is a torch, but only if there's a lot of wood left. I have this thought that bendy-handled bows don't get an arrow rest, and stiff handled bows get a bit of a cut-out (sand-out) & rest. What do you guys think? Oh, the bows I worked on today are a long bamboo-backed ERC, two mulberry workers, a hackberry monstrosity, and an osage bow with one or two rings of sapwood that's actually for me.
Logged
Nothing flying, Nothing dying

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: 2015 Primitive Archer bow trade works in progress
« Reply #58 on: February 09, 2015, 11:18:40 pm »
Hey guys. Just finishing up a yew bow and a black locust bow. Either could be for my dude. I plan on making a bunch more, I'll pick the most suitable one closer to the end date. On our way to the classic maybe I'll give him the bow in person !
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: 2015 Primitive Archer bow trade works in progress
« Reply #59 on: February 09, 2015, 11:18:57 pm »
Yeah, no rest on bendys.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: 1 2 3 [4] 5 6 ... 84
« previous next »