Author Topic: Encyclopedia of NA Bows?  (Read 9103 times)

0 Members and 1 Guest are viewing this topic.

Offline Sasquatch

  • Member
  • Posts: 1,026
Encyclopedia of NA Bows?
« on: November 21, 2014, 02:18:03 pm »
In the books there are many bows with completely rectangular cross sections.  Almost as if they decrowned the staves.  Well did they?  I don't think the books inform you if they did or not.

Offline Comancheria

  • Member
  • Posts: 227
Re: Encyclopedia of NA Bows?
« Reply #1 on: November 21, 2014, 02:24:23 pm »
If you don't mind, Sasquatch, I will add the question: doesn't de crowning automatically violate rings?
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Encyclopedia of NA Bows?
« Reply #2 on: November 21, 2014, 02:28:28 pm »
What type of wood? Some it doesn't matter? Juniper?  >:D
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Encyclopedia of NA Bows?
« Reply #3 on: November 21, 2014, 03:03:14 pm »
Juniper would deffinatly matter :o.    But I think that they were hickory, elm,  I really cant recal. 

My question is how do these bows show a perfectly rectangular cross section without decrowning?  did they have backings? 

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Encyclopedia of NA Bows?
« Reply #4 on: November 21, 2014, 03:38:51 pm »
Just because a stave has been de-crowned does not mean it has violated rings
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline JonW

  • Member
  • Posts: 1,906
Re: Encyclopedia of NA Bows?
« Reply #5 on: November 21, 2014, 03:50:28 pm »
In a short answer, yes they are rectangular in cross section. No they are not decrowned. Not for the large part anyway. I'm not trying to be a wise a$$ but how do you not understand the cross section? Rich (halfeye) and myself discussed this topic in a post a while back. I'll try to find it. Don't over think it. It really is as simple as it sounds.

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Encyclopedia of NA Bows?
« Reply #6 on: November 21, 2014, 04:20:47 pm »
In a short answer, yes they are rectangular in cross section. No they are not decrowned. Not for the large part anyway. I'm not trying to be a wise a$$ but how do you not understand the cross section? Rich (halfeye) and myself discussed this topic in a post a while back. I'll try to find it. Don't over think it. It really is as simple as it sounds.

I understand what a cross section is... but on a typical tree the outside is rounded.  Therefore if the outside of the tree became the back then it should have a curve to it also.   But many of the bows don't show that curve.   

Mark.. I agree, but typically rings are not thick enough to make it a flat back, unless the tree is very large in diameter.  Native Americans were not cutting down big trees like that as a norm.   
 With modern tools and time it would be easy to find a ring that we could make flat.  But even if we did find one i wouldn't want to keep scraping away hoping that the next scrape didn't tear through the lower ring.

Just so everybody knows Im not trying to start some crapy thread/argument.  I just wanted to know why there are so many of the bows listed with completely flat backs

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Encyclopedia of NA Bows?
« Reply #7 on: November 21, 2014, 05:19:18 pm »
There's no reason to believe native Americans/ First Nations weren't capable of falling large trees.
Sure, limb and sapling bows were probably way more common for the average joe for many reasons,
but nice bow staves were of high trade value then, just as it is with us.
I highly believe there were people who spent lots of time cutting and splitting staves for trade.
The First Nations in my area carved 10+man canoes out of one old growth cedar tree.
Would apparently take a team of guys over a week to fall one, but that's nothing compared to a 12" diam Osage tree.
Also, just because a tree is round doesn't mean all your staves will be crowned. I cut a 10" diam black locust, and a couple staves have backs flat as boards.

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Encyclopedia of NA Bows?
« Reply #8 on: November 21, 2014, 05:32:20 pm »
I understand that they could have felled big trees.  Thats why i said "the norm".  I appreciate all the answers, but I don't think that anybody has answered the question.  I know what is possible with many woods.
 My question is were the bows in the book all flat ringed, decrowned without violating the rings, or were the rings violated?    Thanks again for answers. :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Encyclopedia of NA Bows?
« Reply #9 on: November 21, 2014, 05:38:41 pm »
I don't know it these bows were made with decrowned staves or not. I don't remember seeing end grain which would tell for sure. If decrowning is done properly the grain "violations" would be longitudinal and not across the grain. When you go across the grain splinters can lift. When you decrown properly the cuts run with the grain so splinters are less likely to lift.
 I have seen quite a few Native American selfbows with grain violations. 
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Encyclopedia of NA Bows?
« Reply #10 on: November 21, 2014, 05:49:34 pm »
Thanks pat!  I appreciate the answer.  I guess I need to do more research on grain, and how to decrown a stave etc.    Any good resources about decrowning other than TBB series?

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Encyclopedia of NA Bows?
« Reply #11 on: November 21, 2014, 06:08:24 pm »
You can have a small diameter tree with tight rings and still have no violations.  A ring violation is when the ring is cut through to the next one across the back.  You can decrown and as long as each ring runs the full length of the stave then you are good to go
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline JonW

  • Member
  • Posts: 1,906
Re: Encyclopedia of NA Bows?
« Reply #12 on: November 21, 2014, 07:04:33 pm »
The drawings you are referring to are just that, Drawings. They are not meant to be "blueprints" so to speak. The drawing of the cross section does not mean the back or the belly is perfectly flat. It is just showing the general design of the cross section. I have an opinion that the design of the bows you are referring to is a "universal" design for a typical type of bow and cross section that will accommodate many wood types. You can make up for a lack of width with thickness. Keep in mind this is purely my opinion from making many of this type of bow.

Offline Comancheria

  • Member
  • Posts: 227
Re: Encyclopedia of NA Bows?
« Reply #13 on: November 21, 2014, 09:20:44 pm »
Not to beat this to death--I respect everyone's assessment as to there being no ring violation (even though I do not completely understand it)--I think the basis of my own misunderstanding is this:

If you have a stave with curved back, and view it from the end, the rings are of course curved as well.  So if I imagine flattening that curved surface, I am unable to picture how you do not cut through (at the very least) that outer good ring.  I plan to do more reading about this.

Best regards,

Russ
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Encyclopedia of NA Bows?
« Reply #14 on: November 21, 2014, 10:11:50 pm »
Most likely because you don't quite understand what constitutes a ring violation.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com