« previous next »
Pages: 1 [2]

Author Topic: Bow Lamination Thicknesser  (Read 6419 times)

0 Members and 1 Guest are viewing this topic.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Bow Lamination Thicknesser
« Reply #15 on: October 27, 2014, 10:04:26 am »
Good idea!
use what you have
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Stoker

  • Member
  • Posts: 1,729
Re: Bow Lamination Thicknesser
« Reply #16 on: October 27, 2014, 10:33:31 am »
Nicely done... Great Idea... Not trying to be grammer police.. Dethicknesser >:D >:D
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Bow Lamination Thicknesser
« Reply #17 on: October 27, 2014, 10:42:34 am »
Quote from: Stoker on October 27, 2014, 10:33:31 am
Nicely done... Great Idea... Not trying to be grammer police.. Dethicknesser >:D >:D
Thanks Leroy
:laugh:
Dethicknessicatorundttaperingmachinen  >:D
« Last Edit: October 27, 2014, 01:05:19 pm by Del the cat »
Logged
Health warning, these posts may contain traces of nut.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Bow Lamination Thicknesser
« Reply #18 on: October 27, 2014, 10:46:41 am »
Thanks, Del. Good idea will try it out.
Logged
Simon
Bavaria, Germany

Offline Stoker

  • Member
  • Posts: 1,729
Re: Bow Lamination Thicknesser
« Reply #19 on: October 27, 2014, 02:29:48 pm »
Quote from: Del the cat on October 27, 2014, 10:42:34 am
Quote from: Stoker on October 27, 2014, 10:33:31 am
Nicely done... Great Idea... Not trying to be grammer police.. Dethicknesser >:D >:D
Thanks Leroy
:laugh:
Dethicknessicatorundttaperingmachinen  >:D

The machine and word are both winners 8)
Thanks leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Bow Lamination Thicknesser
« Reply #20 on: November 04, 2014, 11:34:43 pm »
  I made one of these years ago, exactly the same and totally different!  I have described it a bunch of times, but never got un-lazy and made some pics!  MIne has wheels that roll on two rails, and a 4x4 in the middle that tilts like this, with the screw up and down.

 love it because I can taper a slat from middle to end, flip[ it around and do the other side exactly the same taper.

  Greaty work, man.
Logged

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Bow Lamination Thicknesser
« Reply #21 on: November 05, 2014, 12:52:23 am »
Made mine from a lathe.  50 grit sanding paper and it works great.
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Bow Lamination Thicknesser
« Reply #22 on: November 05, 2014, 07:54:08 am »
Quote from: Prarie Bowyer on November 05, 2014, 12:52:23 am
Made mine from a lathe.  50 grit sanding paper and it works great.

How does this work, then?  Is it like a standard style where you slide the sled under a sanding drum?
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Bow Lamination Thicknesser
« Reply #23 on: November 05, 2014, 07:58:05 am »
To do tapered lams with this you need to make a blank with the correct taper and then lay your parallel lam on top of it on top of a sled. Everytime you run it throught it will take off the high spot ,when you have no high spot you have a tapered lam.
[/quote]

Oh, then I misunderstood the pics.  Mine makes tapers without a sled/blank.  On mine the screws are for adjustment, the table that holds the lamination strip tilts in the middle, and the wheels run on outside rails.  I run the planer over the wood.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Udate:- tapered a billet
« Reply #24 on: November 14, 2014, 04:55:15 am »
I made an adjustable tapering sled, works a treat.
Here's a pic of a billet of Yew heartwood (for a BBY ELB) on the sled, it's held down with double sided tape.
More pics and description on the blog.
http://bowyersdiary.blogspot.co.uk/2014/11/billet-tapered-on-thicknesser.html
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: Bow Lamination Thicknesser
« Reply #25 on: November 15, 2014, 05:30:08 pm »
Quote from: Springbuck on November 05, 2014, 07:54:08 am
Quote from: Prarie Bowyer on November 05, 2014, 12:52:23 am
Made mine from a lathe.  50 grit sanding paper and it works great.

How does this work, then?  Is it like a standard style where you slide the sled under a sanding drum?

Well I don't want to hijack Dels thread but yes.
Logged
Pages: 1 [2]
« previous next »