Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Adding length
« previous
next »
Print
Pages: [
1
]
2
Author
Topic: Adding length (Read 7584 times)
0 Members and 2 Guests are viewing this topic.
Pat B.
Member
Posts: 62
Adding length
«
on:
June 30, 2014, 04:29:04 pm »
The osage shorty thread made me wonder -------------
If you use glued on tip overlays of horn or perhaps another hard wood could you add a bit of length to nock to nock length by cutting your string grooves a bit beyond the osage stave? In other words, cutting your string grooves out on the overlays rather than in the stave itself.. Wonder if they'd hang on and if so would you still use the super glue as the adhesive of choice ? Maybe a 1/2'' on either end ??
Not worth the risk ?
Logged
Friends are the family we choose
BOWMAN53
Member
Posts: 2,238
Re: Adding length
«
Reply #1 on:
June 30, 2014, 04:32:48 pm »
id think youd wanna go with the best wood glue you can get, with perfect gluelines.
Logged
BOWMAN53
Member
Posts: 2,238
Re: Adding length
«
Reply #2 on:
June 30, 2014, 04:34:00 pm »
not something id wanna shoot though, if that overlay pops off its coming straight for your face.
Logged
Weylin
Member
Posts: 2,296
Re: Adding length
«
Reply #3 on:
June 30, 2014, 04:34:13 pm »
I'd vote for not worth the risk.
Logged
BOWMAN53
Member
Posts: 2,238
Re: Adding length
«
Reply #4 on:
June 30, 2014, 04:34:56 pm »
Quote from: Weylin on June 30, 2014, 04:34:13 pm
I'd vote for not worth the risk.
+100
Logged
huisme
Member
Posts: 1,036
I'm Marc, but not that Marc.
Re: Adding length
«
Reply #5 on:
June 30, 2014, 04:36:15 pm »
I wouldn't even string it up if the bow was over twenty pounds
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.
PEARL DRUMS
Member
Posts: 14,079
}}}--CK-->
Re: Adding length
«
Reply #6 on:
June 30, 2014, 04:36:58 pm »
That's how I do most of mine, have a peek at yours. I cut the grooves in right where the core ends. It allows me to make a 66" ntn bow with a 66" stave. Ive had ONE overlay issue ever. I used the wrong wood and it exploded, no other failures of any type.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pat B.
Member
Posts: 62
Re: Adding length
«
Reply #7 on:
June 30, 2014, 04:52:50 pm »
But don't go beyond what you've described, Chris ?
Logged
Friends are the family we choose
PEARL DRUMS
Member
Posts: 14,079
}}}--CK-->
Re: Adding length
«
Reply #8 on:
June 30, 2014, 04:57:32 pm »
I don't suggest cutting the groove in beyond the end of the bow, no. Consider the forces at work with an overlay and it will make more sense as to why you can get away with it. Unless its too short and pulled too far the string is never pulling on a 90, its always pulling down and in on a healthy bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
bubby
Member
Posts: 11,054
Re: Adding length
«
Reply #9 on:
June 30, 2014, 05:02:31 pm »
I do it quite a bit, altogether usually starts out about flush with the ends, if you make the overlays 6" long you'll have no problems, but I glue those longer overlays on with tb3 I can post a few pic,s when I get home
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Badger
Member
Posts: 8,124
Re: Adding length
«
Reply #10 on:
June 30, 2014, 05:14:29 pm »
I go along with Pearly, just not that much leverage involved even at 1/4" past the stave. Doing them just past flush I don't consider much of an issue at all.
Logged
Pat B.
Member
Posts: 62
Re: Adding length
«
Reply #11 on:
June 30, 2014, 05:42:30 pm »
I would think that even if the glue joint on an overlay was only 1 1/2" that you could get away with string grooves a bit beyond flush...
Thanks for the input..
And I'd like to see any pix if possible ---- just to see what is being done..
I've seen Chris's work up close and personal and it is impecable!
Logged
Friends are the family we choose
DarkSoul
Member
Posts: 1,315
Re: Adding length
«
Reply #12 on:
June 30, 2014, 06:52:10 pm »
This bow
has been an inspiration for me for a long time. Whenever I come across a suitable stave, I will try something similar.
It allows you to splice in tips, which can result in a bow of unlimited length.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286
PatM
Member
Posts: 6,737
Re: Adding length
«
Reply #13 on:
June 30, 2014, 06:56:39 pm »
The extended stave via siyah is the best trick you can do. I make them all the time. I remember when we walked Bert through the splicing process with the above bow.
Here's a couple of four foot Elm staves extended out a foot or so.
«
Last Edit: June 30, 2014, 07:48:59 pm by PatM
»
Logged
bubby
Member
Posts: 11,054
Re: Adding length
«
Reply #14 on:
June 30, 2014, 08:21:45 pm »
is this what you were thinking, I've gone several inches past with no problems, this was just an easy pic to find
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Print
Pages: [
1
]
2
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Adding length