Author Topic: missed it by that much  (Read 1606 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
missed it by that much
« on: June 17, 2014, 07:17:43 pm »
this was my stab at the backpack challenge31" ttt and 36# @ 15", it is 30" at the "nocks", it's just tied on with no cut in nocks, a sliver of a maple board, I deflexed it just a tad and flipped the tips a little to try and help with the string angle but it is pretty tight on these paws, my fault it didn't make 45#, if I make another i'll go a little longer, I think 42"
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: missed it by that much
« Reply #1 on: June 17, 2014, 07:28:10 pm »
Loosen that right limb up half way and pull it another 2-3", you got room according to that string angle.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline autologus

  • Member
  • Posts: 1,092
Re: missed it by that much
« Reply #2 on: June 17, 2014, 07:46:24 pm »
What are the rules for the backpack bow challenge again?

Grady
Proud Hillbilly from Arkansas.

Offline bubby

  • Member
  • Posts: 11,054
Re: missed it by that much
« Reply #3 on: June 17, 2014, 07:58:50 pm »
Got it to 16 1/2" , 16 3/4" killed  it though , such is the life building bows
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: missed it by that much
« Reply #4 on: June 17, 2014, 08:10:19 pm »
Still fun!
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JonW

  • Member
  • Posts: 1,906
Re: missed it by that much
« Reply #5 on: June 17, 2014, 08:54:46 pm »
Awesome effort Bubby. What was the killer? What was the profile? I personally think that was good work with a board.

Offline bubby

  • Member
  • Posts: 11,054
Re: missed it by that much
« Reply #6 on: June 17, 2014, 09:05:17 pm »
jon, I think the killer was that last 1/4", I had 16 1/2" draw from 30", 1 1/2" past half the length, I got greedy and thought maybe i'd get 17",middle 8" was 1 1/8" wide and straight taper to a point, no cut in nocks just a slip knot and a bowyers knot with some half hitches, I did trap the back, I still think I could get 22" with a 42" board, deflex it slightly and flip the tips and get 45#
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JonW

  • Member
  • Posts: 1,906
Re: missed it by that much
« Reply #7 on: June 17, 2014, 09:09:09 pm »
I've seen your tillering and I know you can Bubby. Don't deflex it too much or you may run out of draw weight before you get it to full draw.

Offline bubby

  • Member
  • Posts: 11,054
Re: missed it by that much
« Reply #8 on: June 17, 2014, 09:09:48 pm »
it's all good fun, not like I was gonna shoot it :laugh:
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: missed it by that much
« Reply #9 on: June 17, 2014, 09:10:19 pm »
thank's Jon
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: missed it by that much
« Reply #10 on: June 17, 2014, 10:58:57 pm »
That was a lot of bend out of that piece of trim  ;D
I started out with nothin' and I still got most of it left

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: missed it by that much
« Reply #11 on: June 17, 2014, 11:11:13 pm »
Dang close bub but the greed was your demise ;D.... I'll be looking for the 42" to come out of your bow lab soon. :)
I ain't broke but I'm badly bent.

Offline Josh B

  • Member
  • Posts: 3,741
Re: missed it by that much
« Reply #12 on: June 17, 2014, 11:14:46 pm »
That was a helluva bend you had on it Bub!  You'll nail the next one.  I'm sure of that.  Josh

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: missed it by that much
« Reply #13 on: June 17, 2014, 11:32:02 pm »
Nice effort, Bubby. You got a lot of bend from that stick.  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: missed it by that much
« Reply #14 on: June 17, 2014, 11:43:24 pm »
Thanks guys, I'll hit it again soon
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹