Author Topic: Kanawha Black  (Read 2285 times)

0 Members and 1 Guest are viewing this topic.

Offline nclonghunter

  • Member
  • Posts: 1,779
Kanawha Black
« on: June 15, 2014, 05:20:08 pm »
One more Kanawha Black for Fathers' Day... :)

This one had less sheen to the rock and was a little harder material, but worked nicely.
There are no bad knappers, only bad flakes

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Kanawha Black
« Reply #1 on: June 15, 2014, 05:45:24 pm »
Man that stuff looks tough. :'(
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Kanawha Black
« Reply #2 on: June 15, 2014, 06:30:25 pm »
That does look tough! Not familiar with the material, where does that come from?
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Kanawha Black
« Reply #3 on: June 15, 2014, 08:02:14 pm »
Cowboy, it comes from areas around Charleston West Virginia. The Kanawha River flows through Charleston. Area is also known for the layers of coal in the hills. Quality of the Kanawha flint or chert varies a lot. I used to find many points made from it in plowed fields along the Ohio River.
There are no bad knappers, only bad flakes

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: Kanawha Black
« Reply #4 on: June 16, 2014, 04:08:15 am »
That stuff is similar to some of the stuff I sent u Paul. But Kanawha is getting harder and harder to source for the folks who have the opportunity to knapp it.  It comes from a small outcrop along the river and a lot is fractured.  Not the most favored chert but those who can get it and make stuff usually make some authentic looking points!


Russ
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill