Author Topic: Arrow acceleration from an Oak bow  (Read 2377 times)

0 Members and 1 Guest are viewing this topic.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Arrow acceleration from an Oak bow
« on: June 07, 2014, 05:43:56 pm »
Not really sure where to post this, but I found it interesting. I'd just done a rough calculation of the acceleration of an arrow from my 70# longbow I came up with 289g which sounded bonkers, so I searched the web and found this quirky article.
They fix an accelerometer onto an arrow (yes it adds weight and screw the draw length, but they still recorded 200g ! ::))
http://www.gcdataconcepts.com/arrow.html
I liked the fact that it's a wooden bow and a practical test, not a load of maths.
(Mind they can't shoot worth a damn :laugh:)
Del
Health warning, these posts may contain traces of nut.

Offline Badger

  • Member
  • Posts: 8,124
Re: Arrow acceleration from an Oak bow
« Reply #1 on: June 07, 2014, 06:04:46 pm »
  Del, I have been waiting for that gadget to get just a tad smaller so I can hook it up to flight arrows. Cool isn't it?

Don Case

  • Guest
Re: Arrow acceleration from an Oak bow
« Reply #2 on: June 07, 2014, 06:22:18 pm »
No wonder arrows bend!!!!

mikekeswick

  • Guest
Re: Arrow acceleration from an Oak bow
« Reply #3 on: June 08, 2014, 03:16:01 am »
0 - 100 mph + in a split second.....is some serious G's however you look at it!

Don Case

  • Guest
Re: Arrow acceleration from an Oak bow
« Reply #4 on: June 08, 2014, 12:31:54 pm »
I had a 55 Chevy that was close to that ;) ;) ;)

Offline Badger

  • Member
  • Posts: 8,124
Re: Arrow acceleration from an Oak bow
« Reply #5 on: June 08, 2014, 01:46:35 pm »
http://www.eetimes.com/document.asp?doc_id=1279599

Del, I thought you were talking about this one, check it out.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Arrow acceleration from an Oak bow
« Reply #6 on: June 08, 2014, 03:07:20 pm »
Yeah cool, I'd like one of those to play with.
Are you in/were you in electronics too? If not, ignore the rest of this!

I'm semi retired and can't keep up with all the newfangled stuff. I had to learn a completely new microcontroller for my last project (plus a new pcb layout package and a programming language I'm not used to >:(.... I hate C with a passion, I'd rather work in assembler :). (Old school sums me up!) >:(... never again. I was climbing up the slippery learning curve for months.
Gimme bows and arrows any day.
Each year I say, I'll retire next year, but working a 2 day week pays the utility bills and gives Mrs Cat a couple of days without me under her feet.
Del
Health warning, these posts may contain traces of nut.

JacksonCash

  • Guest
Re: Arrow acceleration from an Oak bow
« Reply #7 on: June 09, 2014, 02:37:43 am »
Badger- That was an interesting article. I wonder if they could get a shock sensor with a higher threshold now that a couple years have gone by... From the article Del linked, that 150g limit might not be enough!

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Arrow acceleration from an Oak bow
« Reply #8 on: June 09, 2014, 03:42:20 am »
cool article.  So a roughly 800 grain arrow from a 38 lb bow reaches 200 Gs.  I wonder what kind of Gs a 400 grain arrow would achieve from the same bow.  Can we assume actual forces are approaching 400 Gs or is there some log-arithmetic involved?
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso