Author Topic: Juniper from Bryce (tiller check?) anyone?!  (Read 23294 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Juniper from Bryce
« Reply #60 on: April 29, 2014, 02:42:04 pm »
I would suggest no less than 8" of reverse reflex, you'll lose no less than half.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce
« Reply #61 on: May 02, 2014, 03:19:26 pm »
So I put two full corses of sinew and one strip down the middle. Thanks again Eric. It's got about 7" of reflex. Now the wait .... How long is long enough?
Nothing ventured nothing gained

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Juniper from Bryce(now sinewed)
« Reply #62 on: May 02, 2014, 03:37:48 pm »
3 weeks minimum in 40% humidity or less. 5-6 weeks if the humidity is 60-70%.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Eric Garza

  • Member
  • Posts: 589
Re: Juniper from Bryce(now sinewed)
« Reply #63 on: May 02, 2014, 06:00:58 pm »
Did you use a mix of the leg and the back sinew, or just the back sinew I sent you?

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce(now sinewed)
« Reply #64 on: May 02, 2014, 06:02:14 pm »
Thanks Chris, how's it look?

Just the back sinew. I had enough so I figured why use the other. It was very nicely processed come pared to what I would have done lol.
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce(now sinewed)
« Reply #65 on: May 05, 2014, 08:51:22 pm »
How long do I leave it reversed braced? Whole time? It's killing me  >:D
Nothing ventured nothing gained

Offline Josh B

  • Member
  • Posts: 3,741
Re: Juniper from Bryce(now sinewed)
« Reply #66 on: May 05, 2014, 11:08:43 pm »
Yes, leave it rev. Braced the whole time.  Start another bow and put that one up somewhere to cure.  Out of sight, out of mind so to speak.  Patience is a must with sinew.  If you rush it you will regret it.  It looks pretty good so far. Josh

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce(now sinewed)
« Reply #67 on: May 05, 2014, 11:46:00 pm »
Yeah since it's nice out bow I can catch up on my knives. Poor soy, his are up first. I got two bows that need finish sanding. I just wanna see what it looks like lol :-[

Thanks josh
Nothing ventured nothing gained

Offline Josh B

  • Member
  • Posts: 3,741
Re: Juniper from Bryce(now sinewed)
« Reply #68 on: May 06, 2014, 12:29:54 am »
That's an even better idea.  I suspect some knife work would not only pass the time nicely, but be greatly appreciated as well!  Josh

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce(now sinewed)
« Reply #69 on: May 06, 2014, 11:27:20 am »
I know this ain't about the bow, but got one of soys knives glued shaped and first coat of super glue.
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Juniper from Bryce(now sinewed)
« Reply #70 on: May 21, 2014, 01:19:51 pm »
Got my skins from idahomatt!! Some sweet bull snake skins. Now only if I don't mess this up.
Nothing ventured nothing gained

Offline autologus

  • Member
  • Posts: 1,092
Re: Juniper from Bryce(now sinewed)
« Reply #71 on: May 21, 2014, 02:06:36 pm »
Those skins are nice, now that we are finally done with sports I need to get started skinning my wife is getting tired of having snakes in the freezer.  It has been a good copperhead season.  ;D

Grady
Proud Hillbilly from Arkansas.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Juniper from Bryce(now sinewed)
« Reply #72 on: May 21, 2014, 02:13:09 pm »

I need to get started skinning my wife

WHHHAAAAAAAAA?!?!?!?!

Offline autologus

  • Member
  • Posts: 1,092
Re: Juniper from Bryce(now sinewed)
« Reply #73 on: May 21, 2014, 02:19:59 pm »
Lol, commas save lives.   >:D

Grady
Proud Hillbilly from Arkansas.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Juniper from Bryce(now sinewed)
« Reply #74 on: May 21, 2014, 02:21:24 pm »
i laughed so hard when i read that, i had to quote it lol.