Author Topic: i need an opinion!  (Read 3000 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
i need an opinion!
« on: April 08, 2014, 12:47:07 am »
I'm thinking of bidding on this. I'm not sure about this but I can't find any osage were I live that's not crazy twisted. It's 63" long 1 1/2"-2" wide and 2" high. What do y'all think. Can the twist be taken out?
Freedom dies one compromise at a time. III%

Offline killir duck

  • Member
  • Posts: 747
  • i like elk
Re: i need an opinion!
« Reply #1 on: April 08, 2014, 02:07:21 am »
Yep no problem, nothin a little heat won't fix, looks like a pretty good stave, decent rings and fairly clean.
PRIMITIVE ARCHERY what other way can you play with sticks and rocks all day and not look like a little kid

Every time i shoot at a bunny i recall the wise words of Elmer Fudd "I've got you now you waskally wabbit!"

Offline bubby

  • Member
  • Posts: 11,054
Re: i need an opinion!
« Reply #2 on: April 08, 2014, 03:11:41 am »
I thought you said it was twisted, that's pretty straight :laugh:
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: i need an opinion!
« Reply #3 on: April 08, 2014, 05:30:26 am »
No problems with that one,nice rings,not wild about the ratio but other than that looks very good. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Badger

  • Member
  • Posts: 8,124
Re: i need an opinion!
« Reply #4 on: April 08, 2014, 08:01:57 am »
  Pappy you are spoiled down there in Tennessee, that looks like primo wood to me.

Offline 4dog

  • Member
  • Posts: 1,610
Re: i need an opinion!
« Reply #5 on: April 08, 2014, 09:30:51 am »
horrible...ugh..nasty..gonna be tough...send it to me? >:D
"SET" is always there !!!

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: i need an opinion!
« Reply #6 on: April 08, 2014, 09:48:44 am »
Great thanks guys!
Freedom dies one compromise at a time. III%

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: i need an opinion!
« Reply #7 on: April 08, 2014, 09:56:56 am »
My take; the early wood late wood ratio looks pretty good on one end but poor on the other, that big embedded limb near the end of the stave may be a problem, you won't know until you take the bark and sapwood off. 63" is pretty short, you can get a 62" bow with pin nocks or about a 61" bow with conventional nocks. Your draw length will determine if this stave is right for you. If you draw 25-27" it will be just fine, any longer draw, it will be a little short unless you make a bendy handle bow or sinew it.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: i need an opinion!
« Reply #8 on: April 08, 2014, 10:05:24 am »
horrible...ugh..nasty..gonna be tough...send it to me? >:D

 ;D
Freedom dies one compromise at a time. III%

Offline Bogaman

  • Member
  • Posts: 132
  • steve white
Re: i need an opinion!
« Reply #9 on: April 08, 2014, 10:23:32 am »
Like everyone else has stated, that's a pretty decent osage stave. Most osage in my area is only good for billets (straightest sections are only about 3 ft.). Good staves  are few and far between.
That one won't need much work to straighten.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: i need an opinion!
« Reply #10 on: April 08, 2014, 10:27:30 am »
I guess I am Steve. :) I will say I have seen a lot worse. That should make a fine bow. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: i need an opinion!
« Reply #11 on: April 08, 2014, 05:52:30 pm »
Twist?
That's not twist, Chubby Checker wouldn't have no truck with that...
Del
Health warning, these posts may contain traces of nut.