« previous next »
Pages: [1] 2

Author Topic: Target arrows  (Read 7528 times)

0 Members and 2 Guests are viewing this topic.

Offline Aaron H

  • Member
  • Posts: 3,437
Target arrows
« on: March 24, 2014, 10:15:10 pm »
This is like the fourth or fifth try at making my own arrows.  They have definitely gotten progressively better.

They are sitka spruce shafts with self nocks.  They have one coat of gunstock stain on the light areas, and three coats of gunstock stain on the darker areas, then I coated them with three coats of tru oil and sanded between each coat with 0000 steel wool.  Then I painted the back with white enamel and striped with red enamel.  The fletching is wild turkey feathers wrapped with elk sinew. Finally I installed 125 grain fields tips.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Target arrows
« Reply #1 on: March 24, 2014, 11:39:44 pm »
Those look very nice. I like the variance of color.  I prefer to have the wrap closer to the nock though.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Target arrows
« Reply #2 on: March 24, 2014, 11:42:31 pm »
Sitka spruce is a great choice for arrows.  Just a few grains heavier than cedar, but twice the strength. 

Your attention to detail is amazing.  Very fine looking nocks. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: Target arrows
« Reply #3 on: March 25, 2014, 12:48:32 am »
Very Nice !  '  Frank
Logged
Frank (The Sparrow) Pataha, Washington

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #4 on: March 25, 2014, 07:12:35 am »
Pat, JW, Sparrow - Thank you for the kind words
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Target arrows
« Reply #5 on: March 25, 2014, 07:54:27 am »
Great looking arrows.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #6 on: March 25, 2014, 07:56:34 am »
Thank you Trapper Rob
Logged

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Target arrows
« Reply #7 on: March 25, 2014, 11:22:17 am »
Now you went and made something too nice to shoot....excellent job.
Logged
There are no bad knappers, only bad flakes

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #8 on: March 25, 2014, 11:35:11 am »
nclonghunter, you are right.  I haven't shot them yet, and I am a little nervous to shoot them.  I don't want to tear them up.  I'm sure I will get over that though.
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Target arrows
« Reply #9 on: March 25, 2014, 03:00:14 pm »
Really nice work - I would be afraid to shoot them too!
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #10 on: March 25, 2014, 08:49:45 pm »
Here is a better close up
Logged

Offline stickbender

  • Member
  • Posts: 3,828
Re: Target arrows
« Reply #11 on: March 26, 2014, 12:19:59 am »

     Man those are absolutely beautiful! :o  Very nice!  But like pat said, it would be better if you wrapped a little closer to the nock, when using self nocks.  It helps to strengthen them.  Good job otherwise, very well done.


                                                                                Wayne
Logged

Offline Mohawk13

  • Member
  • Posts: 402
Re: Target arrows
« Reply #12 on: March 26, 2014, 01:49:02 am »
Nice Job and great looking arrows. Wish My nocks were that consistent....And the sinew closer to the nock...yadayadayada
Logged
He That Raises the sword against us, Shall be cleaved upon seven fold-Talmud.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #13 on: March 26, 2014, 07:14:50 am »
Sounds like I need to wrap more sinew closer to the nock... :laugh:
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Target arrows
« Reply #14 on: March 26, 2014, 07:22:39 am »
For the nocks, I used two hacksaw blades taped together to saw most of it.  Then I used a small round file and some 180 grit sandpaper to finish them. Each nock took about 20 min., but then again I have a lot of people tell me I am OCD with that kind of stuff.
Logged
Pages: [1] 2
« previous next »