« previous next »
Pages: [1]

Author Topic: yew warbow  (Read 8039 times)

0 Members and 1 Guest are viewing this topic.

Offline AH

  • Member
  • Posts: 244
yew warbow
« on: February 24, 2014, 09:29:21 pm »
This took me waaay longer than it should have O:)
I got this stave from carson about a year ago. (Thanks, Carson! :laugh:)
It's 78" nock to nock, and about 90 pounds at 29", which makes it...what, 105 at 32? I didn't get to measure it at 32 as my tiller tree blew when measuring it, at the 29" mark...and so the scale broke too. Flew back twenty-odd feet and scared the life out of me. This bow presented me some challenges in a large knot in the bottom limb, as well about an inch of some reflex in the center, which made it just hell to long string tiller. Also the fact that I don't have any fast flight or dyneema...made it hell to string. I could literally feel the dacron stretching as I drew the bow. There was a lot of character in the stave, and really tight, dense yew. This bow also happened to be my first attempt at horn nocks. Finished with tung oil.

Logged

Offline AH

  • Member
  • Posts: 244
Re: yew warbow
« Reply #1 on: February 24, 2014, 09:31:08 pm »
This is about as far as I can pull it without turning something inside out ;D

and that second photo shows how much shorter the dacron string is to compensate for it stretching...i still couldn't get a decent brace height.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: yew warbow
« Reply #2 on: February 24, 2014, 09:32:19 pm »
Oh my! Spent a little time rubbing in the finish didja?

Prolly ruined your eyesight, huh?   >:D
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline adb

  • Member
  • Posts: 5,339
Re: yew warbow
« Reply #3 on: February 24, 2014, 09:33:03 pm »
You need some FF string. Dacron is just too stretchy for a warbow.
Logged

Offline AH

  • Member
  • Posts: 244
Re: yew warbow
« Reply #4 on: February 24, 2014, 09:33:34 pm »
made with a scrap from roughing out. The mice now have something to fear.
Logged

Offline AH

  • Member
  • Posts: 244
Re: yew warbow
« Reply #5 on: February 24, 2014, 09:34:46 pm »
Quote from: JW_Halverson on February 24, 2014, 09:32:19 pm
Oh my! Spent a little time rubbing in the finish didja?

Prolly ruined your eyesight, huh?   >:D
Think I kind of went overboard on the coats of tung :P
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: yew warbow
« Reply #6 on: February 24, 2014, 10:35:40 pm »
I think you did a good job. Very nice! Nice whipping on the arrow too!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: yew warbow
« Reply #7 on: February 25, 2014, 03:54:56 am »
Great bow from a tricky stave.
I like the nocks, you've got 'em nice and slim with a good clean medieval look, don't want 'em too fancy on a warbow.
Del
(I like the exploding tiller story >:D)
Logged
Health warning, these posts may contain traces of nut.

Offline Yeomanbowman

  • Member
  • Posts: 283
    • warbowwales
Re: yew warbow
« Reply #8 on: February 25, 2014, 05:33:13 am »
Very impressive amount of set and a real character stave.  Good choice making a warbow with it!
Logged

Offline WillS

  • Member
  • Posts: 1,905
Re: yew warbow
« Reply #9 on: February 25, 2014, 08:49:20 am »
Very nice! Jealous of how little set it took!  The tiller looks a bit whip-ended but that tends to give slightly better performance (or so I've heard!)

I reckon you could get that to full draw with relative ease, judging by the fact that you're pulling to your face already.  I can't imagine that bow will stack much so work on your posture by leaning into the bow a lot more and sitting into the draw a bit while bringing the elbow higher and you should find you get a lot further.
Logged

Offline Heffalump

  • Member
  • Posts: 68
Re: yew warbow
« Reply #10 on: February 25, 2014, 11:34:20 am »
Great looking bow - love the nocks, really business-like warbow. Nice one  ;)
Logged
Semper Specto in Vitae Parte Clara

Offline adb

  • Member
  • Posts: 5,339
Re: yew warbow
« Reply #11 on: February 27, 2014, 11:38:21 am »
I'd love to see this warbow at full draw (minimum 30").
Logged

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: yew warbow
« Reply #12 on: February 27, 2014, 08:53:03 pm »
Nice work, man that's turning me inside out just thinking about it!
Logged

Offline AH

  • Member
  • Posts: 244
Re: yew warbow
« Reply #13 on: February 27, 2014, 10:36:50 pm »
Quote from: adb on February 27, 2014, 11:38:21 am
I'd love to see this warbow at full draw (minimum 30").
Working on that right now, I'm at 27 ish inches (I think) but my shoulder feels like a boulder fell on it. :-[
Logged

Offline leehongyi

  • Member
  • Posts: 157
Re: yew warbow
« Reply #14 on: April 19, 2014, 11:53:20 pm »
It seems nice! what string material did you use? Dacron or FF?
Logged
Pages: [1]
« previous next »