« previous next »
Pages: [1]

Author Topic: backing material ????  (Read 4543 times)

0 Members and 1 Guest are viewing this topic.

shootinbud

  • Guest
backing material ????
« on: December 18, 2007, 08:08:47 pm »
what would you guys reccomend backing a black cherry board bow with ?
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: backing material ????
« Reply #1 on: December 18, 2007, 08:51:02 pm »
  Rawhide,Black cherry is kinda brittle.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: backing material ????
« Reply #2 on: December 18, 2007, 09:00:14 pm »
Or a really thin strip of hickory.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline snedeker

  • Member
  • Posts: 907
Re: backing material ????
« Reply #3 on: December 18, 2007, 10:20:14 pm »
Maple would be great.  I've backed some lighter woods fantastically with his strips.

Dave
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: backing material ????
« Reply #4 on: December 18, 2007, 11:57:08 pm »
Silk, linen.      Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Knocker

  • Member
  • Posts: 271
  • Tumwater, Washington
Re: backing material ????
« Reply #5 on: December 19, 2007, 12:59:15 am »
Don't mean to steal your thread, but my question is the same topic.  When you use backing strips of wood, do the backing strips need to be taken down to a single ring as you would a stave?  And is there any other material that adds draw weight to the bow like sinew does? 

Keith
The Lord must not be an Archer. He gave a deer just enough brains to tan his hide, so you'd think he would provide enough sinew to back a bow...
Logged
If ye love wealth better than liberty, the tranquility of servitude
better than the animating contest of freedom, go home from
us in peace. We ask not your counsels or arms. Crouch down
and lick the hands which feed you. May your chains set
lightly upon you, and may posterity forget ...

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: backing material ????
« Reply #6 on: December 19, 2007, 02:29:35 am »
Knocker, all wood backings add weight.  Most guys prefer backings cut ring bias ////or vertical grain lllll  so chasing a ring would be impossible. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

330bull

  • Guest
Re: backing material ????
« Reply #7 on: December 19, 2007, 09:41:45 am »
Cherry Bark.   :)
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: backing material ????
« Reply #8 on: December 19, 2007, 02:10:28 pm »
Hi,
I've backed cherry boards with 1/8" quarter sawn (vertical grain) hickory, and 3/16" quarter sawn maple, and both have worked very well. Super strong, little string follow. I suppose rawhide would also work well (have not tried it myself). Cherry is pretty light, and can be a bit brittle. The bows I've made with it have turned out well.
Logged
Pages: [1]
« previous next »