« previous next »
Pages: [1]

Author Topic: what tool is this?  (Read 2446 times)

0 Members and 1 Guest are viewing this topic.

Offline emd023

  • Member
  • Posts: 42
what tool is this?
« on: January 08, 2014, 07:14:11 pm »
i must have one lol. the guy in this video uses the tool at 3:30.

http://www.youtube.com/watch?v=hNKevyClBlg
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: what tool is this?
« Reply #1 on: January 08, 2014, 07:21:43 pm »
I think Pip uses a spokeshave at that point
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline aaron

  • Member
  • Posts: 1,037
Re: what tool is this?
« Reply #2 on: January 08, 2014, 07:31:25 pm »
I have a couple of these but don't use them much for bows- they work OK on straight grained wood, but can cause "tear outs" on tricky grain. If you do get one make sure it has a curved sole (curved front-to-back like a ski tip). Because of potential tear outs they are not good for tillering. IMO a good rasp and a real cabinet scraper are much better for minor wood removal.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline PatM

  • Member
  • Posts: 6,737
Re: what tool is this?
« Reply #3 on: January 08, 2014, 07:53:19 pm »
Could also be a scraper holder like the Veritas model that Lee Valley sells.
http://www.leevalley.com/US/wood/page.aspx?p=32669&cat=1,310
Logged

Offline lostarrow

  • Member
  • Posts: 1,348
Re: what tool is this?
« Reply #4 on: January 08, 2014, 10:23:19 pm »
My guess would be scraper as well.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: what tool is this?
« Reply #5 on: January 08, 2014, 10:38:13 pm »
His hands were moving so fast I thought for a moment that it was Blackhawk cranking out one of his 30 minute Saturday Nite Specials!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: what tool is this?
« Reply #6 on: January 08, 2014, 10:55:55 pm »
Wow, that veritas scraper holder is cool, you can put a bend in the scraper and everything, pretty cool. Veritas makes so many cool things.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: [1]
« previous next »