« previous next »
Pages: 1 2 [3]

Author Topic: Some english style arrows / first arrows from my router jig, also new fletch jig  (Read 15970 times)

0 Members and 1 Guest are viewing this topic.

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #30 on: January 27, 2014, 11:11:44 pm »
hmm..never thought of it that way...i might also try the multi layered hacksaw blades
Logged
Archeress is a long way from home

Offline Mohawk13

  • Member
  • Posts: 402
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #31 on: January 27, 2014, 11:15:29 pm »
Nice looking arrows!!! I like the fletching jig..
Logged
He That Raises the sword against us, Shall be cleaved upon seven fold-Talmud.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #32 on: January 28, 2014, 01:44:18 am »
Quote from: Archeress on January 27, 2014, 11:11:44 pm
hmm..never thought of it that way...i might also try the multi layered hacksaw blades

After trying both, I favor the layered hacksaw blades myself.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #33 on: January 28, 2014, 01:44:34 am »
Quote from: Mohawk13 on January 27, 2014, 11:15:29 pm
Nice looking arrows!!! I like the fletching jig..

Thank you!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #34 on: January 28, 2014, 03:32:12 am »
well i thought i had seen your arrows before....they turned up on my FB page courtesy of Ari Laakso.
Logged
Archeress is a long way from home

Offline WillS

  • Member
  • Posts: 1,905
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #35 on: January 28, 2014, 03:52:30 am »
If I may throw a spanner in the works - the Richard Head jig doesn't work! I had to send back three before I got a decent one as they were all badly cut and not straight! I pinned him down at the NLHF and he was disappointed himself in the quality.  I use a tile saw as well for my horn inserts and it chews up the jig so easily that after 12 arrows the slots are jagged and it's easier doing it free hand.

Here's a couple pics of my attempts at EWBS liverys

Goose fletchings (kinda chunky quill as they were my early attempts at grinding full feathers)


And Turkey
Logged

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #36 on: January 28, 2014, 03:57:28 am »
Very noice wills...we are a clever bunch :)  I bought a steel block jig from nidderdale..just for nocks on 11/32 arrows.  i love it...havent experimented with the longer slot..i may work out a way to make my own.
Logged
Archeress is a long way from home

Offline WillS

  • Member
  • Posts: 1,905
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #37 on: January 28, 2014, 04:46:08 am »
I was going to mention Nidderdale - I think Richard (the guy who owns Nidderdale) makes very good stuff.  I bought a jig from him that runs a drill down the center of an arrow shaft so you can insert little steel rods to bring the weight up - very handy and very well made.

I've seen his nock cutting jig (did you get the one that you use with a little drill first?) and it looks pretty good.

I've just ordered some natural barred turkey feathers because I really like Daniel's fletching.  Hopefully I'll get somewhere close to his!
Logged

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #38 on: January 28, 2014, 04:54:51 am »
yes..but i still didnt understand the idea of drilling a hole into the side of the shaft?.  i read the instructions yet continued to have blonde moments.
Logged
Archeress is a long way from home

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #39 on: January 28, 2014, 05:05:59 am »
My very first bought set of arrows have a drill hole at the end of the nock slot.  i dont see an advantage in doing this?.  the hole is slightly wider than tha actual slot width so wondered if the string would be affected upon release.
Logged
Archeress is a long way from home

Offline WillS

  • Member
  • Posts: 1,905
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #40 on: January 28, 2014, 05:32:20 am »
I've got a feeling it's designed to give you that "click" you get with plastic nocks.  The slot is tight on the string, but the drilled hole is slightly loose, so the arrow is unrestricted but won't fall off.  That's just a guess though. 

Or it was just his way of making the whole thing easier, and he approached it from inside out.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #41 on: January 28, 2014, 07:09:14 pm »
Quote from: Archeress on January 28, 2014, 03:32:12 am
well i thought i had seen your arrows before....they turned up on my FB page courtesy of Ari Laakso.

You mean mine? They might of made it there via the fellow I gave these to, I think he said he put them up there. I am not on facebook myself, I think facebook is evil,  :).

Quote from: WillS on January 28, 2014, 03:52:30 am
If I may throw a spanner in the works - the Richard Head jig doesn't work! I had to send back three before I got a decent one as they were all badly cut and not straight! I pinned him down at the NLHF and he was disappointed himself in the quality.  I use a tile saw as well for my horn inserts and it chews up the jig so easily that after 12 arrows the slots are jagged and it's easier doing it free hand.

Here's a couple pics of my attempts at EWBS liverys

Goose fletchings (kinda chunky quill as they were my early attempts at grinding full feathers)


And Turkey

Super nice arrows! Thanks for the tip on the jig. You think it would work with a hacksaw better?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline WillS

  • Member
  • Posts: 1,905
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #42 on: January 28, 2014, 07:18:32 pm »
Yeah it might well do.  Probably, actually, as the tile saw chews it up as it's abrasive all round while a saw obviously only cuts bottom edge.   I could never get to grips with the numerous saw blades!
Logged

Offline Archeress

  • Member
  • Posts: 90
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #43 on: January 28, 2014, 07:50:13 pm »
However.....a well worn tile saw is pretty good.  I bought a new tile saw blade and yes you are right..very jagged..but i am wearing it in on other woods and metals first. 
Logged
Archeress is a long way from home

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Some english style arrows / first arrows from my router jig, also new fletch jig
« Reply #44 on: January 28, 2014, 10:30:36 pm »
Very nice arrow work Knots, finely crafted beauties.
Logged
I ain't broke but I'm badly bent.
Pages: 1 2 [3]
« previous next »