« previous next »
Pages: [1]

Author Topic: Tapering tool?  (Read 2713 times)

0 Members and 1 Guest are viewing this topic.

Offline TacticalFate

  • Member
  • Posts: 234
Tapering tool?
« on: December 31, 2013, 06:28:17 pm »
I bought a box of field points a while back, but didn't realize I needed to taper my arrows for them. My question is that the "pencil sharpener" type taper tools all recommend that they only be used on softwoods. Has anyone used them on hardwood shoot shafts like dogwood or privet?
Logged

Offline lostarrow

  • Member
  • Posts: 1,348
Re: Tapering tool?
« Reply #1 on: December 31, 2013, 07:08:48 pm »
work fine ! have used them on oak, maple, cherry, ash etc,.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tapering tool?
« Reply #2 on: December 31, 2013, 09:07:20 pm »
Keep the blade sharp.  The point taper is 5 degrees so you can set up a jig and taper your arrows on a belt sander if you have one.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Don Case

  • Guest
Re: Tapering tool?
« Reply #3 on: January 01, 2014, 02:03:49 am »
Is there a standard taper for this?
Logged

Offline Dharma

  • Member
  • Posts: 453
  • Kayenta, AZ
Re: Tapering tool?
« Reply #4 on: January 01, 2014, 02:27:08 pm »
I've used the pencil sharpener type taper tool on ash shafts and while it takes more time and effort, it works.
Logged
An arrow knows only the life its maker breathes into it...

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tapering tool?
« Reply #5 on: January 01, 2014, 05:21:51 pm »
The standard taper for the point end is 5deg and for the nock end is 11deg.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »