Author Topic: Used Reclaimed Bandsaw Blades  (Read 2565 times)

0 Members and 1 Guest are viewing this topic.

Offline neuse

  • Member
  • Posts: 469
Used Reclaimed Bandsaw Blades
« on: December 18, 2013, 09:13:29 am »
Where could I find used reclaimed bandsaw blade material?
I am wanting some to make wood carving knives and i have read that this is a good material resource.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Used Reclaimed Bandsaw Blades
« Reply #1 on: December 18, 2013, 10:26:35 am »
You could also use circular saw blades. They might be easier to find.
 
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Used Reclaimed Bandsaw Blades
« Reply #2 on: December 18, 2013, 10:36:10 am »
What size are you looking for"  Width?  Thickness?
I started out with nothin' and I still got most of it left

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Used Reclaimed Bandsaw Blades
« Reply #3 on: December 18, 2013, 12:27:45 pm »
I have a few "dead" bandsaw blades also.  What size are you looking for?

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Used Reclaimed Bandsaw Blades
« Reply #4 on: December 18, 2013, 01:45:36 pm »
I have some too. 1 1/8" wide, X thin.  :-[ ;D dp
(:::.)    Osage music played daily. :)

Offline neuse

  • Member
  • Posts: 469
Re: Used Reclaimed Bandsaw Blades
« Reply #5 on: December 18, 2013, 05:21:29 pm »
I think I need an inch or more wide, have no idea about thickness.

PatB, what do I need to watch for in regards to circular saw blades?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Used Reclaimed Bandsaw Blades
« Reply #6 on: December 18, 2013, 06:22:12 pm »
I guess for a carpenter to throw one away or at least turn his head!  ;D  I've made trade points from old circular saw blades. I think about any have good enough steel and they are soft enough that you can cut then with a good hacksaw or a cold chisel.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Used Reclaimed Bandsaw Blades
« Reply #7 on: December 18, 2013, 06:46:53 pm »
Circular saw blades make excellent scrapers to
I started out with nothin' and I still got most of it left

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Used Reclaimed Bandsaw Blades
« Reply #8 on: December 18, 2013, 08:10:25 pm »
Sorry, I have none over an inch wide.  Wish my machine was that big, but it is not. 

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Used Reclaimed Bandsaw Blades
« Reply #9 on: December 18, 2013, 10:43:14 pm »
I have a blade from a sawmill bandsaw I think it's 6in or 8in wide.

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: Used Reclaimed Bandsaw Blades
« Reply #10 on: December 23, 2013, 02:54:23 pm »
I think I have some the width you need.......traded one a while back to Keenan.....will look and let you know.
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II