« previous next »
Pages: [1]

Author Topic: Another newbie question.....youth bow dimensions.  (Read 1081 times)

0 Members and 1 Guest are viewing this topic.

Offline dane lund

  • Member
  • Posts: 103
Another newbie question.....youth bow dimensions.
« on: November 16, 2013, 02:07:48 pm »
OK, one more for the experts.!
I'd like I build my two youngest grandsons a bow.  One is 4 and the other 12.
Is there a standard, or rule of thumb for dimensions for bow design to get one down to a pull weight that they will be able to use? Of course one that will actually function as well.
Again, thanks in advance .
Logged
In His grip,
Smallpatch

Offline J05H

  • Member
  • Posts: 478
Re: Another newbie question.....youth bow dimensions.
« Reply #1 on: November 16, 2013, 06:50:21 pm »
If there is, I'd like to know as well. I'm planning a couple for my nieces. My plan was just to figure out their draw length and what they can pull and just scale down some hunting weight dimensions to match then slightly overbuild those dimensions and back with linen.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Another newbie question.....youth bow dimensions.
« Reply #2 on: November 16, 2013, 08:15:18 pm »
I've heard 20#@20" a lot for kids bows.  You could just scale down from a regular hunting bow.   There is also the school of thought that an adult is probably going to end up pulling it, so make it draw 28" so they don't blow it up. I think 30#@28" would end up being around 20#@20". 
  You could do 20#@20" and provide 20" arrows with it, so anybody pulling it will only pull to the end of the arrow, unless they want an arrow in the hand.   
Logged
Pages: [1]
« previous next »