« previous next »
Pages: 1 [2]

Author Topic: Tiller tips...  (Read 6890 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Tiller tips...
« Reply #15 on: November 16, 2013, 03:55:47 pm »
Hey Will, seeing as you've finished tillering this bow as you said.... when ya gonna post that glorious full draw?  ;) Will be interested to check it out, it is looking like a nice bow...
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline WillS

  • Member
  • Posts: 1,905
Re: Tiller tips...
« Reply #16 on: November 16, 2013, 04:09:19 pm »
Not quite done yet!  Haven't tillered at full brace height yet, couldnt work on it over this weekend as I'm away but possibly by next weekend? Don't worry I'll be snapping pics asap!
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Tiller tips...
« Reply #17 on: November 16, 2013, 06:16:43 pm »
Okee Dokey, will be following this thread. I'm working on a couple of roughly the same weight. Good luck!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair
Pages: 1 [2]
« previous next »