« previous next »
Pages: [1] 2

Author Topic: HHB mollie( sorta) tiller check  (Read 3449 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
HHB mollie( sorta) tiller check
« on: October 18, 2013, 08:19:40 pm »
Well this is where I'm at so far. Just sorta winging it.
« Last Edit: October 29, 2013, 03:37:13 pm by Blaflair2 »
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #1 on: October 18, 2013, 08:24:33 pm »
64" long 2" wide till last 8" of a lever. Gotta get it bending and straighten some more twist
Logged
Nothing ventured nothing gained

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: HHB mollie( sorta)
« Reply #2 on: October 18, 2013, 08:55:18 pm »
Its looking good so far. I've never used hhb but know its supposed to be primo.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #3 on: October 18, 2013, 09:00:01 pm »
It's all over up here. I'm waiting till next spring to cut this one I found, 5" diameter. About a 12" gently bend with no branches. I wanna try and get some nice reflexed staves from it.
Logged
Nothing ventured nothing gained

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: HHB mollie( sorta)
« Reply #4 on: October 18, 2013, 09:21:22 pm »
About 10 years ago we had a major fire on our farm, burned quite a few acres of hardwood. Since then I've noticed some new growth hhb that I hadn't seen before. Most of it in clumps. I'm keeping my eye on it, so far the largest trunks are only about 2-3" thick and maybe 10' tall.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #5 on: October 18, 2013, 09:33:15 pm »
I found one about 15" wide. But it's jot somewhere I could cut
Logged
Nothing ventured nothing gained

blackhawk

  • Guest
Re: HHB mollie( sorta)
« Reply #6 on: October 19, 2013, 09:12:54 am »
At those specs you might be able to narrow and taper the last few to several inches of the working limb before the lever....I think you'll still have enough meat if tempered,and it'll get some mass off and will also look a lil better aesthetically ....but your starting out right with a lil more width than you'll need ;)
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #7 on: October 27, 2013, 01:23:12 pm »
Still chipping away. Got it floor tillered and now I have to find a long string. Para chord will work? We'll see. It's still got a little deist but I don't think it'll hurt. Very minimal. Once I get it tillered more gonna shape the levers and narrow everything. It's about 1 7/8" wide now. Going for 1 3/4". I haven't tempered since rough out and still very springy. This thing should be a rocket. Ill post pix later when I get a chance
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #8 on: October 27, 2013, 01:23:46 pm »
Twist not deist
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta)
« Reply #9 on: October 29, 2013, 01:34:30 pm »
So here it is so far. Just tempered it last night. I know I have to work the ends near the levers more. Suggestions help is appreciated. It's 1 3/4" wide. Getting pretty thin. Critisism always accepted
Logged
Nothing ventured nothing gained

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta) tiller check
« Reply #10 on: October 29, 2013, 04:04:24 pm »
I have to figure out what to use as a short string. The para chord stretches. Nylon rope?
Logged
Nothing ventured nothing gained

Offline stickbender

  • Member
  • Posts: 3,828
Re: HHB mollie( sorta) tiller check
« Reply #11 on: October 29, 2013, 05:09:34 pm »

     Artificial sinew, or Pro Line fishing line, which is pretty much fast flight string.  Or go to Three Rivers, and get some bow string there.

                                                Wayne
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: HHB mollie( sorta) tiller check
« Reply #12 on: October 29, 2013, 05:37:24 pm »
Your outer portion of the working section is looking a little stiff to me.  Try to get the most out of the working section to achieve lowest stress on the wood.  Go slow because not much removal is needed to get a little bend :)
Logged

Offline HAWKEYE18

  • Member
  • Posts: 5
Re: HHB mollie( sorta) tiller check
« Reply #13 on: October 29, 2013, 05:51:57 pm »
I agree with Matt. To me it looks like most the bend is right after the fades.
Logged
You can always count on Americans to do the right thing--after they have tried everything else.
Sir Winston Churchill

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: HHB mollie( sorta) tiller check
« Reply #14 on: October 29, 2013, 06:11:50 pm »
Yeah that's what I see too. Just gotta find a short string to get it to brace and then start tillering again
Logged
Nothing ventured nothing gained
Pages: [1] 2
« previous next »