Author Topic: Building my teardrop camper "WIP" build along (Read 36737 times)

JW_Halverson · « **Reply #30 on:** September 24, 2013, 10:36:25 am »

Quote from: skyarrow on September 24, 2013, 09:55:06 am

Hopefully you will get to see it patrick i plan to take it to the classic next year

You gonna draw a crowd if you do that. Next thing you know it's gonna be a cottage industry just providing teardrops for them! Then someone is gonna want waterbuffalo horn accents and snakeskins on it.

skyarrow · « **Reply #31 on:** September 24, 2013, 11:49:05 am »

Haha right!!!!!

Gus · « **Reply #32 on:** September 24, 2013, 06:20:58 pm »

I like what you've done so far...
But might I suggest one small design change?

-gus

criveraville · « **Reply #33 on:** September 24, 2013, 07:21:33 pm »

I like it Gus!! But Sterling make it hop!!

Cipriano

lowell · « **Reply #34 on:** September 24, 2013, 07:43:45 pm »

Enjoying this thread too...always thought a tear drop would be cool...and still do.

Just not ready to build one. But I like watching someone else work!!

mullet · « **Reply #35 on:** September 24, 2013, 09:24:37 pm »

I like mine, but I bought it. I'm getting like Pappy.

wildman · « **Reply #36 on:** September 24, 2013, 10:50:23 pm »

'' Make it hop" your killing me

Sterling,Im getting the itch to tear into my trailer cool thread

skyarrow · « **Reply #37 on:** September 25, 2013, 02:03:04 pm »

Not much progress this morning just mainly planning the modification of the blocks on where the holes will go

skyarrow · « **Reply #38 on:** September 26, 2013, 11:12:22 am »

This mornings progress went well i drilled the holes and welded the blocks

all i need now is to go buy some longer U-bolts

Gus · « **Reply #39 on:** September 26, 2013, 02:17:16 pm »

Are you gonna have to change the setup on your Outriggers/Stabilizers?
Or are they long enough as is?

-gus

skyarrow · « **Reply #40 on:** September 26, 2013, 03:24:02 pm »

Il either have to get taller blocks for under the stabilizers or just weld an extention

skyarrow · « **Reply #41 on:** September 27, 2013, 01:58:07 pm »

Todays progress was finishing up mounting the axle with the new U-bolts and i washed the welds on a plate off an old tailgate and used it for a fender top plate/ blowout protection we flipped it back over and hopefully prep it for painting next week and mount the floor