Need ideas for an arrow rack

[JonW]

Clint I saw somewhere a rack made from one of those fluorescent light covers that was about 3/8 squares.

[bow101]

Hopefully this pic helps........

[Southpaw4]

I had seen one not too long ago that looked really cool, too bad I don't have pictures, it was a shield type shape that incorporated a shelf for a bow or two, had room for a dozen.holes drilled into top surface of shield for a dozen arrows fanned out, looked pretty easy as long as points not too big, only downside is you couldn't see the points

[Southpaw4]

Somewhat like this is pretty cool. Hopefully I don't have problems wither the pic

[NeolithicMan]

southpaw4 that rack is gorgeous! simple yet elegant... i have a cardboard tube i stuff my arrows into with a piece of plywood and nails on the bottom. works to hold arrows while i target shoot but no where in the realm of that sweet set up!

[lostarrow]

OOOOOOooooo..... I like it. Consider this design stolen

[bowtarist]

The other day I was making some arrows and after sealing the sinew I needed a place to set them. I picked up two pcs. of red osier I had cut off the ends earlier in the weeks and used them to lay the arrows across while they dried. Then I got the idea...why not make an arrow rack out of the same material I'm making the arrows out of.  The bark was still on the osier and it looked real cool, so...that is my project for the winter, an osier arrow rack similar to PatB's, but maybe with a center support as well.

Beautiful rack you have there southpaw!!

dp

[hedgeapple]

SouthPaw, I think I steel some of the idea of that rack.  'cept I'll do a turkey silhouette with the arrows as the tail feathers. 

[lostarrow]

SouthPaw, I think I steel some of the idea of that rack.  'cept I'll do a turkey silhouette with the arrows as the tail feathers.

 Are you going to hang the bows from the turkey's antlers?

[hedgeapple]

SouthPaw, I think I steel some of the idea of that rack.  'cept I'll do a turkey silhouette with the arrows as the tail feathers.

 Are you going to hang the bows from the turkey's antlers?

of course, it will the elusive TURKALOPE.    Actually, I didn't realize the antlers were bow racks.  No prob, I'll use turkey feet for the bow rack. 

[lostarrow]

SouthPaw, I think I steel some of the idea of that rack.  'cept I'll do a turkey silhouette with the arrows as the tail feathers.

 Are you going to hang the bows from the turkey's antlers?

of course, it will the elusive TURKALOPE.    Actually, I didn't realize the antlers were bow racks.  No prob, I'll use turkey feet for the bow rack. 

 Sounds like a tasty critter to me!

[Southpaw4]

Hehe, turkalope. Heck I wish that rack was mine.better believe when i get time to make one it will look something like this one. Beauty is you can change it up pretty easily it looks like

[Davesea]

Holds two dozen in compact design and no holes to thread the shafts through.

[bow101]

Good idea I like it Davesea.  Quite a bit of drilling to make it and use more material, just my 2 cents worth.

[BryanR]

I like to show points up.  Eventually I'll have a rack of different point styles and materials.