« previous next »
Pages: [1] 2

Author Topic: 58" red oak flat bow  (Read 9547 times)

0 Members and 2 Guests are viewing this topic.

Offline mikebarg

  • Member
  • Posts: 54
58" red oak flat bow
« on: April 25, 2013, 02:02:35 pm »
I just finished this red oak flat bow. Pretty simple. 58" NTN draws 35# @ 27". 1.5" wide at the handle . parallel limbs until the last 12 ", then tapering to 1/2" at the tips. I did a leather handle wrap. I learned a lot in the process of making this bow. I want to make my next one in this same style but with a 40-45 # draw weight. I've shot  about 70 arrows threw it so far. Sorry, I don't have a lot build pics. I'll try to document the next one.
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: 58" red oak flat bow
« Reply #1 on: April 25, 2013, 02:07:52 pm »
Looks pretty good so far, ...but we'll be needing a FullDraw pic! :)

OneBow
Logged

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: 58" red oak flat bow
« Reply #2 on: April 25, 2013, 02:10:07 pm »
Nice job with a simple design, brace profile looks good too.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline bubby

  • Member
  • Posts: 11,054
Re: 58" red oak flat bow
« Reply #3 on: April 25, 2013, 02:37:29 pm »
brace actually look's like the outer limbs aren't bending  and the middle is doing it all, can you post a full draw
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

blackhawk

  • Guest
Re: 58" red oak flat bow
« Reply #4 on: April 25, 2013, 02:39:55 pm »
Bub beat me to it.....yeah...you need more bend from mid limb out,and too much is bending in and around the handle...but congrats on getting a shooter
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: 58" red oak flat bow
« Reply #5 on: April 25, 2013, 02:47:13 pm »
im not sure what to think, if it was over stressed in the middle then why did it only take like an inch of set? its a bit weird because all my bows which bend more evenly are much higher set. so im wondering if maybe his tiller isnt so bad after all.
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline mikebarg

  • Member
  • Posts: 54
Re: 58" red oak flat bow
« Reply #6 on: April 25, 2013, 03:10:20 pm »
I do think the outer limbs should bend more. I need to get someone to shoot a pic while I draw the bow.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: 58" red oak flat bow
« Reply #7 on: April 25, 2013, 03:27:38 pm »
I do almost all my f/d shots with the timer on my camera if that's an option
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: 58" red oak flat bow
« Reply #8 on: April 25, 2013, 07:31:58 pm »
+1 with what the others said. It needs more bend in the limbs. I'd check for chrysals under that handle wrap too. Oak has a tendency to chrysal easily. Like you said, this bow was a great learning experience, and hopefully your next one will be even better!  ;D Nice job.

Jon
Logged

Offline dwardo

  • Member
  • Posts: 1,456
Re: 58" red oak flat bow
« Reply #9 on: April 26, 2013, 05:46:53 am »
Quote from: bubby on April 25, 2013, 03:27:38 pm
I do almost all my f/d shots with the timer on my camera if that's an option

Me too after my missus complaining so much. Usually takes several attempts mind.
Logged

Offline mikebarg

  • Member
  • Posts: 54
Re: 58" red oak flat bow
« Reply #10 on: April 26, 2013, 11:23:27 am »
I took a shot with the timer. didn't come out great but I can see that outter limbs are not bending enough. I flipped the pic and added some guide lines to help see the symmetry.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 58" red oak flat bow
« Reply #11 on: April 26, 2013, 11:37:00 am »
Mike the braced pic rarely lies. When your braced bow has a traingular shape to it, your drawn profile will to most often. You need some serious wood removal on the whole limbs. Leave the center 12" alone.
« Last Edit: April 26, 2013, 12:07:11 pm by PEARL DRUMS »
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline adb

  • Member
  • Posts: 5,339
Re: 58" red oak flat bow
« Reply #12 on: April 26, 2013, 04:20:58 pm »
What's happening at brace is only magnified at full draw.
Logged

Offline mikebarg

  • Member
  • Posts: 54
Re: 58" red oak flat bow
« Reply #13 on: May 01, 2013, 05:16:38 pm »
OK. I've been reworking it. I've done a lot of scraping to get to this point. It's not there yet but it's moving in the right direction.
Logged

Offline TacticalFate

  • Member
  • Posts: 234
Re: 58" red oak flat bow
« Reply #14 on: May 01, 2013, 05:25:50 pm »
Better, still needs a bunch more work in the outer limbs. My guess is that you'll be down to at least 25lbs by the time it's fixed up.
Logged
Pages: [1] 2
« previous next »