« previous next »
Pages: 1 [2] 3 4 ... 18

Author Topic: Can't get started in making a bow  (Read 46792 times)

0 Members and 3 Guests are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #15 on: February 10, 2013, 07:57:36 pm »
Now your catching on. From the side your bow will 1/2" in the center thinning down to 7/16" at the tips. Are you seeing how both your width and thickness tapers change together now? That creates an EVEN, smooth bend while allowing the bow to narrow towards its tips. Get that done and its time to cut string grooves in.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Can't get started in making a bow
« Reply #16 on: February 10, 2013, 09:39:33 pm »
Listen to Pearly about the thickness taper of the limb.  He finely got that beat into my head and it really helps.  I take my ferriors rasp and taper the limbs down evenly.  When it comes time to tiller, there aren't any suprises, its already got a nice bend to it.  Then its just some fine tuning and removing wood to get to your weight.
Logged
I started out with nothin' and I still got most of it left

Offline dmc

  • Member
  • Posts: 136
Re: Can't get started in making a bow
« Reply #17 on: February 10, 2013, 10:44:51 pm »
Quote from: PEARL DRUMS on February 10, 2013, 07:57:36 pm
Now your catching on. From the side your bow will 1/2" in the center thinning down to 7/16" at the tips. Are you seeing how both your width and thickness tapers change together now? That creates an EVEN, smooth bend while allowing the bow to narrow towards its tips. Get that done and its time to cut string grooves in.
I really like how easy you are making this sound Pearl Drums. I usually suffer paralysis by analysis, and end up not doing anything. Good advice on this thread.
Logged
Carpe Diem- Seize the Day!!

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #18 on: February 10, 2013, 11:07:54 pm »
Quote from: dmc on February 10, 2013, 10:44:51 pm
Quote from: PEARL DRUMS on February 10, 2013, 07:57:36 pm
Now your catching on. From the side your bow will 1/2" in the center thinning down to 7/16" at the tips. Are you seeing how both your width and thickness tapers change together now? That creates an EVEN, smooth bend while allowing the bow to narrow towards its tips. Get that done and its time to cut string grooves in.
I really like how easy you are making this sound Pearl Drums. I usually suffer paralysis by analysis, and end up not doing anything. Good advice on this thread.
Really good advice, I suffer through the same thing but this makes it almost easy (so far)
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Can't get started in making a bow
« Reply #19 on: February 11, 2013, 01:20:52 am »
If you can't get the nerve up take a snort of whiskey and dive in.   >:D
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #20 on: February 13, 2013, 06:20:04 pm »
Alright, i got the thickness tapered down as evenly as I can
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #21 on: February 13, 2013, 06:31:38 pm »
Come back 1" off each tip and file in string grooves at 45 degree angles towards the belly, they should be deep enough to hold your string.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #22 on: February 13, 2013, 06:33:38 pm »
towards the belly as in \_______/  ?
                                      n  belly  n
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #23 on: February 13, 2013, 06:35:28 pm »
Like this.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #24 on: February 13, 2013, 06:39:24 pm »
Which side should be my belly, or does it not matter?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #25 on: February 13, 2013, 06:58:24 pm »
The belly always faces the archer, the back always faces the target. No matter what bow or who made it. In your case the back is the portion you havent touched on that board. You rasped your thickness taper in on the belly. The back of a bow never gets touched until its time to sand. All tillering and wood removal will be on the belly from here out.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #26 on: February 13, 2013, 08:05:34 pm »
Quote from: PEARL DRUMS on February 13, 2013, 06:58:24 pm
The belly always faces the archer, the back always faces the target. No matter what bow or who made it. In your case the back is the portion you havent touched on that board. You rasped your thickness taper in on the belly. The back of a bow never gets touched until its time to sand. All tillering and wood removal will be on the belly from here out.
Got that done, they are a bit offset but it shouldn't cause a problem. What next?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #27 on: February 13, 2013, 08:29:18 pm »
Get a bow string in the 68" length range. Im guessing you have to tree or board to tiller with?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #28 on: February 13, 2013, 08:50:39 pm »
Is this good enough?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #29 on: February 13, 2013, 08:52:27 pm »
Good enough. Next one you make you need to angle those slots upward so the string cant slip out any way.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: 1 [2] 3 4 ... 18
« previous next »