Author Topic: D/R osage stave build-a-long  (Read 19613 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
D/R osage stave build-a-long
« on: January 21, 2013, 12:26:52 pm »
So I have this stave that has a little character in the center lengthwise and I'm wondering what would be the best design to use with it.  I kind of have one in mind but I wanted to see what you guys think.  Besides the center whoop-de-doo it is straight with good rings and just a few pin knots.  Centering the handle on the deflexed area would make a 66" bow easily.



« Last Edit: January 21, 2013, 10:24:38 pm by osage outlaw »
I started out with nothin' and I still got most of it left

Offline Roy

  • Member
  • Posts: 1,079
Re: Best design for this stave
« Reply #1 on: January 21, 2013, 12:38:14 pm »
Ya better keep that under lock and key or ole Chicken hawk will come and steal it:)

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Best design for this stave
« Reply #2 on: January 21, 2013, 01:05:26 pm »
I have the twin to that one leaning againt the shop wall. Im listening.......
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Best design for this stave
« Reply #3 on: January 21, 2013, 01:49:31 pm »
That looks like a blackhawk special

Offline rhansen

  • Member
  • Posts: 44
Re: Best design for this stave
« Reply #4 on: January 21, 2013, 02:21:22 pm »
This would be an outstanding build along!

blackhawk

  • Guest
Re: Best design for this stave
« Reply #5 on: January 21, 2013, 02:30:55 pm »
Roy n rob are right pal  ;D .... do I even need to say what id do with that  >:D ..... go for it   ;)

Offline seabass

  • Member
  • Posts: 2,267
Re: Best design for this stave
« Reply #6 on: January 21, 2013, 02:40:50 pm »
i have one like that too Clint.mine has that swoop on both ends but going in opposite directions.what ever you do with it,good luck.that is a nice stave and will make a cool bow.
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Best design for this stave
« Reply #7 on: January 21, 2013, 02:45:10 pm »
Roy n rob are right pal  ;D .... do I even need to say what id do with that  >:D ..... go for it   ;)


Lets here it Chickenhawk
I started out with nothin' and I still got most of it left

blackhawk

  • Guest
Re: Best design for this stave
« Reply #8 on: January 21, 2013, 02:53:37 pm »
Get a ring chased on her....find the apex of the deflex kink and mark center...measure 32" each way from center and lay out a standard flat bow profile....cut it out....get a good a nice floor tiller on her so she's ready to heat shape over a form....then stop and wait to work on it till the classic..and ill bring my half caul ti get some nice even reflex thru each limb for a sexy r/d profile....we'll heat her up and shape her...then you can go take lunch,and when ya come back your stave and I will be gone...lol  :laugh:

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Best design for this stave
« Reply #9 on: January 21, 2013, 03:00:29 pm »
I'm going to have to keep it handcuffed to my wrist at all times down there.
I started out with nothin' and I still got most of it left

Offline Roy

  • Member
  • Posts: 1,079
Re: Best design for this stave
« Reply #10 on: January 21, 2013, 03:08:24 pm »
Told ya he would snitch it, Clint...

blackhawk

  • Guest
Re: Best design for this stave
« Reply #11 on: January 21, 2013, 03:09:43 pm »
Well..I was serious up until the last comment..lol..I'm sure you know tho....but seriously get it well floor tillered,or about readily to low brace type weight and even tiller...that way it'll be ready to shape over my form if you wanna wait and do it at the classic,that way we should be able to tiller it out...tillering R/D is a breeze....just come n grab me if you need an eyeball on the tree...up to you if ya want to tho....

Maybe we'll steam them tips n put in some statics too ;) hehehehehe...even mo fun. A R/D static osage...hell yeah...now were talking.

blackhawk

  • Guest
Re: Best design for this stave
« Reply #12 on: January 21, 2013, 03:14:18 pm »
Told ya he would snitch it, Clint...

Yeah n your gonna be riding/laughing all the way back to pa with me while its stashed in the back of my van  >:D

Roy...you gotta mark some days off n head down there...your ole @$$(literally) would love it.

Offline seabass

  • Member
  • Posts: 2,267
Re: Best design for this stave
« Reply #13 on: January 21, 2013, 03:28:01 pm »
will you guys help me with my stave if i bring it down?
Middletown,Ohio

Offline seabass

  • Member
  • Posts: 2,267
Re: Best design for this stave
« Reply #14 on: January 21, 2013, 03:30:39 pm »
here is a pic of mine Clint.
Middletown,Ohio