« previous next »
Pages: [1] 2 3

Author Topic: Red Oak Trade (Unfinished Pics Added)  (Read 7575 times)

0 Members and 1 Guest are viewing this topic.

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Red Oak Trade (Unfinished Pics Added)
« on: January 15, 2013, 03:47:17 pm »
So I am working on my red oak board trade bow and have it coming along nicely. My tiller is slightly off and I need your guys input as usual. I am shooting for 50# at 30 inches. Right now at 27 I am 52#. Can you guys point me in the right direction where I need to remove wood...

I think mid limb out is still pretty stiff but I keep using my Gizmo and removing where it says... A little help would be appreciated guys... If this makes it this will be my second successful bow so I am still really new to the tillering gig... (sorry if the picture is too big... PB being a pain as usual lately)


Braced at 7 inches


Drawn to 27 inches and right at 52#


Thanks as usual guys for the help... Couldn't do it without you

Justin
« Last Edit: January 16, 2013, 06:23:33 pm by bowhntineverythingnh03743 »
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Tiller Check Fellas
« Reply #1 on: January 15, 2013, 03:50:22 pm »
mid limb both limbs are too stiff, thus causing your fades and early inner limb to hinge
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline Jodocus

  • Member
  • Posts: 897
Re: Tiller Check Fellas
« Reply #2 on: January 15, 2013, 03:58:16 pm »
you should probably make a new gizmo... ???

maybe a shorter one, mybe yours is so long it misses the main bend near the fades?
Logged
Don't shoot!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Tiller Check Fellas
« Reply #3 on: January 15, 2013, 03:59:14 pm »
The last 1/3 of each limb needs to work more, that will change the appearance of the mids.  Your dang close.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: Tiller Check Fellas
« Reply #4 on: January 15, 2013, 04:05:38 pm »
Quote from: PEARL DRUMS on January 15, 2013, 03:59:14 pm
The last 1/3 of each limb needs to work more, that will change the appearance of the mids.  Your dang close.


x2
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Re: Tiller Check Fellas
« Reply #5 on: January 15, 2013, 04:53:22 pm »
Ok guys how we looking now... 50# at 28 inches and I got to have it 50@ 30

« Last Edit: January 15, 2013, 05:04:59 pm by bowhntineverythingnh03743 »
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Tiller Check Fellas
« Reply #6 on: January 15, 2013, 04:55:24 pm »
Looks the same man. Mark off 6" on each end, leave that area alone. Now scrape the next 6-8" beyond that line about 15 times per limb. Exercise it 10-15 times and look again.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Re: Tiller Check Fellas (Round 2 Pictures)
« Reply #7 on: January 15, 2013, 04:56:39 pm »
Ok Pearly will do... Do I have much wiggle room? Will this change the weight removing too much wood from these areas?
Logged

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Re: Tiller Check Fellas (Round 2 Pictures)
« Reply #8 on: January 15, 2013, 04:57:23 pm »
LMAO... It looks the same Pearly because it is!!!! Wrong upload... give me a second lol
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Tiller Check Fellas (Round 2 Pictures)
« Reply #9 on: January 15, 2013, 05:05:00 pm »
you can tell its better because its not hinging as bad, but still work on it
Logged
Amo innectis arcus- I love crafting bows (latin)

Offline bow101

  • Member
  • Posts: 2,235
Re: Tiller Check Fellas (Round 2 Pictures)
« Reply #10 on: January 15, 2013, 05:34:03 pm »
Is the outer thrid really doing much bending......? ??? ???
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Re: Tiller Check Fellas (Round 2 Pictures)
« Reply #11 on: January 15, 2013, 05:50:33 pm »
Fellas how am I looking now with this bow... Figure I would take it off the tree and draw it??? :-\

Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Tiller Check Fellas (Full Draw Added)
« Reply #12 on: January 15, 2013, 05:56:07 pm »
That same area I spoke off could use a tad more bend, it wont change the weight much. Thats all stored up in the fades and first 16-18" mostly. Other than that, Id say damn fine job. Funny how you got two different replys from the same pic and the same fella? Hmmmm????
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bowhntineverythingnh03743

  • Member
  • Posts: 170
Re: Tiller Check Fellas (Full Draw Added)
« Reply #13 on: January 15, 2013, 06:03:10 pm »
Thanks Pearly... I thought that it could still use just a little more. Just didn't want to go too fast with it and come under weight. I mean the guy I am building it for gave me a 40-60 gap so I want to hit it right in the middle at 50... Like I said this is only my second bow and my first trade/ board... Still need to work on the handle once the tiller is complete.

Be back in a bit then lol... again thanks.. you guys are much better than I am at tillering so any advise I can get from you all I store it away!

Justin
Logged

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Tiller Check Fellas (Full Draw Added)
« Reply #14 on: January 15, 2013, 08:45:25 pm »
im impressed! its looking much better than when you first asked for help
Logged
Amo innectis arcus- I love crafting bows (latin)
Pages: [1] 2 3
« previous next »