I've been working on a white oak molle for the last month, or so. It is my first attempt at a rawhide back. I finally got it to weight, today and shot it a couple dozen times. Just have to finish shooting in, skin it, and put my finish on it. It is 64" n2n and 52 lbs @ 26". Here are a few pics..
Here it is braced at 6".

Here it is at 23"

Here is a pic of the handle build up with a 1/4" piece of poplar...

I also put a piece on front on top of the rawhide.

Here is a side view of the handle.

I still have to do some rounding when sanding. Here is a pic right after unstringing. There was slack in the string when I first unstrung it. I just noticed the slack is gone by the time I got my camera and took the pic. Set looks like a 1/2 to 1 inch of set.

Here is a pic of the zebrawood tip.
