Author Topic: juniper west coast style bow, HLD (No. 7)  (Read 21189 times)

0 Members and 1 Guest are viewing this topic.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
juniper west coast style bow, HLD (No. 7)
« on: September 17, 2012, 03:45:54 pm »
Some time ago i got an interesting piece of juniper with a lot of little picks on the back and an silvery shining surface (after debarking of course). The piece was not very long, so i decided to try a west coast style. The bow  is incredibly light, with the sinewed tips only 276 grams. I made the bow 49" ntn with hollow limbs. On the upper limb just under the tip was a big dead piece of wood (from a big branch)., I cut it of an glued in a new piece from the same stave.
The dark spots are holes from dead branches.
I have experimented with the concave limb design already on about 20 or so bows with very good results (saves a lot of mass).

the bow is drawn to about 23" on the f/d pic
havent measured drawweight, but feels like 40-45#
the paddle is 2,5" wide
the mass of this bow is nearly  nothing, the wind can blow her away ....
no backing, nocks are strengthened with sinew because the string would easily cut through the soft wood
















« Last Edit: December 19, 2014, 03:49:44 am by simson »
Simon
Bavaria, Germany

Offline Parnell

  • Member
  • Posts: 5,556
Re: juniper west coast style bow, hollow limb design
« Reply #1 on: September 17, 2012, 04:25:54 pm »
Look out, that's differently done!  I'm impressed!
1’—>1’

Offline sadiejane

  • Member
  • Posts: 1,030
Re: juniper west coast style bow, hollow limb design
« Reply #2 on: September 17, 2012, 04:31:09 pm »
outstanding bow!
(as is the other one you posted)
wild women don't get the blues

Offline NruJaC

  • Member
  • Posts: 54
    • Personal Blog
Re: juniper west coast style bow, hollow limb design
« Reply #3 on: September 17, 2012, 04:34:56 pm »
Oh wow that is some concave section. Absolutely amazing work. I still want to know how you did it! I found this old discussion (http://paleoplanet69529.yuku.com/topic/9520/Concave-limbs#.UFdy7BBBXmE) on the subject, and the consensus seemed to be that it would require an extremely elastic wood, and probably shorten the life of the bow!
Arjun from Reston, VA

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: juniper west coast style bow, hollow limb design
« Reply #4 on: September 17, 2012, 04:47:22 pm »
   Mr. Simpson,
                         That is the most interesting bow. Thanks for sharing. The tips are so small and with that ultra low mass the hand shock would be a lite little thump just shoving the arrow.
                                                                    Don
                                             
                       

                                                 
« Last Edit: September 17, 2012, 04:54:01 pm by burchett.donald »
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Jodocus

  • Member
  • Posts: 897
Re: juniper west coast style bow, hollow limb design
« Reply #5 on: September 17, 2012, 04:49:36 pm »
You have posted a pic of that wood before, right? I have been thinking about it at times quite surprisingly again and again, it never really left my head. I think it was a good idea you didn't put sinew on the back. A really cool piece. Looks like those pieces of wood you sometimes find on the banks of rivers, that have been carved by sand and water. There will probably never be one like this again!
Oh, and the pics are very nicely done.  8)
« Last Edit: September 17, 2012, 04:55:20 pm by Jodocus »
Don't shoot!

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: juniper west coast style bow, hollow limb design
« Reply #6 on: September 17, 2012, 06:02:34 pm »
I am digg'n your bows simson.  Love the pics too.  Inspiring work.
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: juniper west coast style bow, hollow limb design
« Reply #7 on: September 17, 2012, 06:25:31 pm »
thats an awesome bow..... i wonder what other woods could stand up to being concave
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline coaster500

  • Member
  • Posts: 1,741
Re: juniper west coast style bow, hollow limb design
« Reply #8 on: September 17, 2012, 06:40:13 pm »
Back to back winners!!!

Really interesting work!!
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline sharpend60

  • Member
  • Posts: 355
Re: juniper west coast style bow, hollow limb design
« Reply #9 on: September 17, 2012, 07:16:53 pm »
Very nice work.

I really like unique bows.
Yours defiantly qualifies .

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: juniper west coast style bow, hollow limb design
« Reply #10 on: September 17, 2012, 07:43:11 pm »

Another one of a kind bow from you simson, really love your work.
Greg
I ain't broke but I'm badly bent.

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: juniper west coast style bow, hollow limb design
« Reply #11 on: September 17, 2012, 07:44:56 pm »
Great looking bow. That is a wild limb design. Nice work.
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline bubby

  • Member
  • Posts: 11,054
Re: juniper west coast style bow, hollow limb design
« Reply #12 on: September 17, 2012, 08:14:02 pm »
cool bow, I'm wondering if a narrower limb equals the low mass your getting but adding a longer life to the bow? Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: juniper west coast style bow, hollow limb design
« Reply #13 on: September 17, 2012, 08:34:53 pm »
Low mass is only one potential advantage of the the hollow limb design. See this interesting discussion:

http://www.primitivearcher.com/smf/index.php/topic,2544.0.html

Gabe
Humboldt County CA.

Offline bubby

  • Member
  • Posts: 11,054
Re: juniper west coast style bow, hollow limb design
« Reply #14 on: September 17, 2012, 08:40:37 pm »
thank's Gabe, i'll read that acouple or twenty times and see if it sink's in, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹