Suggestions for splitting a curved log?

[1rik]

Hi,

I'm in the process of shaping a stave out of a log of english oak (Quercus robur) for my first bow. (the straight one in the photo)
And I have a second log wich is curved. I would love to try make a bow out of it, but I don't really know if it would make a bow and how to split the log to get the best piece out of it.
So I was hoping some of you might have an idea on how how to split it.

[JW_Halverson]

Try to pick a point where the split will make sure that the belly sides of the split are the flattest.  That way as much of the character will be side to side and you will have less to worry about in heat treating to take out excess recurve and decurve.

If there is a bow in that crazy log, and I don't doubt there is, it's gonna look wild!  Good luck. And of course....post pics!

[gstoneberg]

I let 2 things help me choose how to split a log...knots and going for the least about of side to side heat bending.  I try to split staves so it puts a minimum of knots in the working part of the limbs.  Other than that I try to get staves that have tips that line up with the handle, especially in a snaky stave.

Good luck,
George

[LivingElemental]

The bow or two you get out of that log are going to look crazy good if you take your time with them. Just don't rush it, whatever you do.