« previous next »
Pages: [1] 2

Author Topic: tiller check on a simple d-bow. (eastern woodland )  (Read 5250 times)

0 Members and 1 Guest are viewing this topic.

Offline Josh B

  • Member
  • Posts: 3,741
tiller check on a simple d-bow. (eastern woodland )
« on: June 10, 2012, 11:35:56 am »
Hows my tiller lookin'?  Osage ,60" ntn drawn to 30". Parallel limbs until 10" from tips, straight taper to 1/2" tips.  Thanks for looking, Josh
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #1 on: June 10, 2012, 11:48:38 am »
looks like a good circle to me. some may say the tips may be stiff but I like them a little stiff like yours. I like this design for osage, maybe a little shorter even.
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #2 on: June 10, 2012, 11:56:29 am »
Put some finish on her, then shoot the snot out of it >:D
rich
Logged

Offline country

  • Member
  • Posts: 231
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #3 on: June 10, 2012, 12:06:08 pm »
Doc....its looking good
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #4 on: June 10, 2012, 12:21:45 pm »
If you kept the limbs parallel that far out they need to bend more that far out. I say the middle needs more work on bth side. That tiller would be great if the parallel section was 12-14" rather than 2/3's the length. Parallel limb sections do most of the work. The tapering section is the lever.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline coaster500

  • Member
  • Posts: 1,741
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #5 on: June 10, 2012, 12:27:12 pm »
Looks good to me Doc...  love shootin the little benders!!!
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #6 on: June 10, 2012, 12:37:41 pm »
 If it were me,(  ::) ) now is when I'd work the limbs back to or through the handle area. I wait until the limbs are bending well before I bring the bend back towards the handle. To me this is the safest time to do so because of the leverage of the limbs. Another option if the handle area is uncomfortable in it's width is to narrow the handle area and round the edges for a more comfortable grip. This will allow it to bend a little too. A little of both might be in order if you want to go that way.
  I think the tips are OK as they are.  ;)
  These simple bows are what get my juices flowing. The more simple the better, IMO! It is obvious you've done your part so far.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #7 on: June 10, 2012, 02:38:41 pm »
Quote from: JonW on June 10, 2012, 11:48:38 am
looks like a good circle to me. some may say the tips may be stiff but I like them a little stiff like yours. I like this design for osage, maybe a little shorter even.

Same here. The stiff tips make a smoother drawing bow. What is the point in sitting back and admiring the tiller pearl if the thing stacks like pancakes in a IHOP. Nice tiller, I would say it is perfect.
« Last Edit: June 10, 2012, 02:41:52 pm by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline SA

  • Member
  • Posts: 452
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #8 on: June 10, 2012, 02:56:43 pm »
i think it looks really good , i agree with pat b on shaping the handle  some and getting it to bend just a tad in the middle.
Logged
Shawn Acker

Offline Parnell

  • Member
  • Posts: 5,556
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #9 on: June 10, 2012, 03:22:38 pm »
Hmm, well, first off, it's a good looking bow!  To get 30" at 60 length is pretty darn great.  That being said, if it were mine, I'd move the handle and get maybe a little more working limb mid-to end.  Looks good though!
Logged
1’—>1’

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #10 on: June 10, 2012, 03:43:28 pm »
Betcha the handle is working. How thick is it? I think it is great. Excellent tiller. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Josh B

  • Member
  • Posts: 3,741
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #11 on: June 10, 2012, 04:06:42 pm »
You are correct Jawge!  There is a slight set back at the handle so its doing its job.  I agree pearly, the mid limbs are a smidgen flat.  But I was  up against target weight so called it good.  Thanks for the replies everyone!  Josh
Logged

blackhawk

  • Guest
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #12 on: June 10, 2012, 07:05:04 pm »
Sure like seeing wood bend to its true potential....yeah maybe a tad more mid limb but its aok as is
Logged

Offline Josh B

  • Member
  • Posts: 3,741
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #13 on: June 10, 2012, 08:37:51 pm »
Thanks Blackhawk!  Its gonna have to do for now.  Josh
Logged

Offline xin

  • Member
  • Posts: 381
Re: tiller check on a simple d-bow. (eastern woodland )
« Reply #14 on: June 10, 2012, 08:48:21 pm »
Looks great to me.  I'm working on a piece of Sage that looks exactly like yours and I pray it turns out as well.  Making exactly the same design also.
 
« Last Edit: June 10, 2012, 09:01:05 pm by xin »
Logged
Pages: [1] 2
« previous next »