Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Best Way To Build A Tillering Tree?
« previous
next »
Print
Pages: [
1
]
Author
Topic: Best Way To Build A Tillering Tree? (Read 6485 times)
0 Members and 1 Guest are viewing this topic.
tradrick
Guest
Best Way To Build A Tillering Tree?
«
on:
September 03, 2007, 11:54:16 pm »
Hey guys,I'm wanting to start building a tillering tree for my shop.I plan on mounting it to the wall.From pics I've seen it looks pretty basic but I want to make sure.Is'nt it usally just a 2x4 or something with a shelf built on top to hold the bow.Then you can hook your bow scale on the bow string with a rope tied to the bottom of the scale and through a pulley to excercise the limbs and determine what the draw weight is at a given draw length.Am I missing anything?Also draw length is determined from the back of the bow or the front of were the shelf would be and the measurements down the 2x4 should start from the back of the bow.Am I correct?If not someone please correct me.And if anyone has any pics of their set-up please post.Thanks tradrick
Logged
Auggie
Member
Posts: 652
redneck engineer
Re: Best Way To Build A Tillering Tree?
«
Reply #1 on:
September 04, 2007, 10:45:43 am »
Hey, check out Tn hickory comes to michigan, Danas tree is K.I.S.S. and works really well,just look at his pics. Auggie.
Logged
laugh. its good for ya
DanaM
Member
Posts: 9,211
Re: Best Way To Build A Tillering Tree?
«
Reply #2 on:
September 04, 2007, 10:50:02 am »
Thanks Auggie, yea keep it simple all ya need is a 2x4 with abracket to hold bow or in my case I used a floor joist to attach the bracket.
A back board with reference marks is also nice. I used a piece of cardboard although I think I will upgrade to plywood as I have found a free piece
Two pulleys could be an advantage as you get compounded pulling force=less effort to pull, could be nice when exercising the limbs.
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."
Manistique, MI
Justin Snyder
Administrator
Member
Posts: 13,794
Re: Best Way To Build A Tillering Tree?
«
Reply #3 on:
September 04, 2007, 12:50:47 pm »
There is a detailed picture of Greg's on here,
http://www.primitivearcher.com/smf/index.php/topic,1637.0.html
and George has some on his site. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.
SW Utah
tradrick
Guest
Re: Best Way To Build A Tillering Tree?
«
Reply #4 on:
September 04, 2007, 09:32:17 pm »
Thanks for the help as usual guys.I knew it was pretty basic I just wanted to make sure there was'nt anything I was leaveing out.I like the board in the back with the lines that would help as a visuale aid in tillering.And since I'm still pretty green at this I need all the help I can get.tradrick
Logged
GregB
Member
Posts: 4,079
Greg Bagwell
Re: Best Way To Build A Tillering Tree?
«
Reply #5 on:
September 05, 2007, 02:22:00 pm »
A couple of suggestions...I would make sure that saddle where the bow handle will rest has straight vertical sides, and a width not to excessive. If you're tillering a bow with reflex, it will want to jump out of the saddle if not secure with shims...the straight sides help allow for easier securing of the bow.
Also I would make sure that the saddle is offset such that the scales and rope are pulling down directly under the bow handle, not slanted.
Logged
Greg
A rich person can be poor monetarily, the best things in life are free...
Badger
Member
Posts: 8,124
Re: Best Way To Build A Tillering Tree?
«
Reply #6 on:
September 05, 2007, 04:30:21 pm »
Another feature I think is worth a few extra dollars is a good pulley. I like to use automotive type idler pulley's with sealed and lubricated ball bearings. They are very smooth and well worth the extra $20.00. Steve
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Best Way To Build A Tillering Tree?