Author Topic: Red oak board question  (Read 1280 times)

0 Members and 1 Guest are viewing this topic.

Offline Rick Wallace

  • Member
  • Posts: 766
Red oak board question
« on: May 03, 2012, 03:37:35 am »
I ve built several board bows (successfully) out of boards from Big box stores. I believe they are kiln dried.I was recently gifted some full 1" x 6" rough cut red oak boards that were cut last year,air dried.Question is will these work better than the kiln dried boards? Ive got one started,seems to be easier to work with so far. Grain is very straight on the one im using.
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Red oak board question
« Reply #1 on: May 03, 2012, 05:52:04 am »
Air dried wood works just as good as kiln dried wood. It's one of those old myths that keeps floating in the books...
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Red oak board question
« Reply #2 on: May 03, 2012, 10:16:12 am »
Some of the quickest bows I've made were from kiln dried red oak. I, too, would say no difference. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Rick Wallace

  • Member
  • Posts: 766
Re: Red oak board question
« Reply #3 on: May 03, 2012, 11:04:07 am »
Thanks guys,I was hoping it would be better somehow!  :)
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does