« previous next »
Pages: [1]

Author Topic: How far do you insert foreshafts?  (Read 2481 times)

0 Members and 1 Guest are viewing this topic.

Offline jermcramp1

  • Member
  • Posts: 147
How far do you insert foreshafts?
« on: April 19, 2012, 12:26:18 pm »
I was trying for 3" but it is not working for me...Would you say 1-2"? and do you glue them in or not.
Logged
Even the dogs get the crumbs...

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: How far do you insert foreshafts?
« Reply #1 on: April 19, 2012, 06:42:24 pm »
 >:D
Logged
There are no bad knappers, only bad flakes

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: How far do you insert foreshafts?
« Reply #2 on: April 20, 2012, 01:50:15 am »
Go to youtube,  Search "otzi arrow build" there is a 3 video serries.

I send mine in 2-3" when I can but I use bamboo for the foreshafts.  I select a piece that wants to go in already and just drill out the main shaft a bit.  Then I suggest bottoming out a node wall AND wrapping the shaft with a stop collar.
Logged

Offline jermcramp1

  • Member
  • Posts: 147
Re: How far do you insert foreshafts?
« Reply #3 on: April 20, 2012, 11:10:58 am »
I made a little tool last night and it worked, not sure why I was having so much trouble with something so simple...

I just drilled a hole in a piece of wood with the same bit I drilled the boo, then used it as a guide for the insert of the foreshaft...so simple...
Logged
Even the dogs get the crumbs...

Offline bubby

  • Member
  • Posts: 11,054
Re: How far do you insert foreshafts?
« Reply #4 on: April 23, 2012, 05:27:31 pm »
Quote from: jermcramp1 on April 20, 2012, 11:10:58 am
I made a little tool last night and it worked, not sure why I was having so much trouble with something so simple...

I just drilled a hole in a piece of wood with the same bit I drilled the boo, then used it as a guide for the insert of the foreshaft...so simple...
yep, nessesity is the mother of invention, sooner or later us redneck's can make anything work >:D, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

gutpile

  • Guest
Re: How far do you insert foreshafts?
« Reply #5 on: April 25, 2012, 12:12:15 pm »
I don't drill mine..bout 1 1/2 bottom out on node...make sure you blunt the tip of your fore shaft or it will split your cane on impact..I have never split my cane since I blunt the tip and wrap with sinew..yes I glue mine with hide glue..soak in water to remove if needed..gut
Logged

gutpile

  • Guest
Re: How far do you insert foreshafts?
« Reply #6 on: April 25, 2012, 12:12:52 pm »
sorry bout that pic...
Logged

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: How far do you insert foreshafts?
« Reply #7 on: April 25, 2012, 02:22:05 pm »
Those are some deadly looking arrows gutpile! What do use for foreshaft material?  Did you knap those points?
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

gutpile

  • Guest
Re: How far do you insert foreshafts?
« Reply #8 on: April 25, 2012, 03:41:45 pm »
any hardwood will do..
those are paduka and purple heart....and no self respecting southern Cherokee Indian gonna buy points for their arrows..LOL.... 8)
Logged
Pages: [1]
« previous next »