« previous next »
Pages: [1]

Author Topic: question about type of wood for arrows  (Read 1673 times)

0 Members and 1 Guest are viewing this topic.

Offline mcginnis6010

  • Member
  • Posts: 520
question about type of wood for arrows
« on: February 22, 2012, 02:32:32 am »
Is white pine or spruce make good arrows or Athens ERC? I have a bunch of ERC laying around.
Logged
Once a soldier always a soldier. Hoooah!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: question about type of wood for arrows
« Reply #1 on: February 22, 2012, 02:35:57 am »
White pine, spruce and ERC all make good arrows if they have good grain and no knots or grain swirls.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mcginnis6010

  • Member
  • Posts: 520
Re: question about type of wood for arrows
« Reply #2 on: February 22, 2012, 02:40:47 am »
Thanks pat. Once again your immense knowledge has saved me alot of trouble and time. Your advice and knowledge is greatly appreciated.
Logged
Once a soldier always a soldier. Hoooah!

Offline Baldmoose

  • Member
  • Posts: 97
Re: question about type of wood for arrows
« Reply #3 on: February 27, 2012, 06:53:21 pm »
Tamarak also works very well..... headed out this afternoon to cut up the log into 3/8 squares
Logged
Baldmoose
"The Pain is Worth The Glory"

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: question about type of wood for arrows
« Reply #4 on: February 27, 2012, 10:39:59 pm »
Jawge makes barreled shafts of white pine. I've made lots of shafts of northern white spruce. I only tried red cedar for one shaft. It came out beautiful but very weak. Have also made lots of Douglas fir shafts and a few of yellow pine. Those two are strong but heavier.

Jim
Logged
Jim Davis

Kentucky--formerly Maine
Pages: [1]
« previous next »