« previous next »
Pages: [1] 2

Author Topic: time to call it a night  (Read 2263 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
time to call it a night
« on: February 17, 2012, 02:56:15 am »
Just want to share my good times.   I flat knapped one side and on the other I did a base to center flute then a tip to center.  It is only 6 to 1 but what fun. I did this when I got off work tonight and thought I should call it a night and finish it this weekend. Tower this is some of that flint from Texas.





Logged
(:::.) The ABO path is a new frontier to the past!

Offline TRACY

  • Member
  • Posts: 4,523
Re: time to call it a night
« Reply #1 on: February 17, 2012, 08:26:51 am »
The flute worked well!

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline Tower

  • Member
  • Posts: 2,298
Re: time to call it a night
« Reply #2 on: February 17, 2012, 09:58:31 am »
That side is flat alright. How does that stone work?
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: time to call it a night
« Reply #3 on: February 17, 2012, 10:49:33 am »
Nice flute. Now if you could flute the other side and build ya a clovis around it...
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #4 on: February 17, 2012, 01:44:23 pm »
Tower I love the way this stone works

Cowboy hehe I wish I could but I am only practicing the fluting while making points so that I can understand them better.  On this one I really want to keep driving these sheet flakes off. The thinner the preform the smaller the platform is getting. The challenge now is how to work a flatter surface. I would like to get to 7:1 ratio.

I watched a paleomanjim demo on fluting and learned something that I am using in the flat flaking. He made a point (statement) while preparing the nipple to remove the ground (abraded) surface on each side of the nipple, he did this so the stone could break clean in that area and not rip out the other side. Soooooooo when preparing a platform I make real small pressure flakes to each side where I want the flake to detach. This has made a big difference in the type of flake I get and reduces the digging that can occur when a flake releases. Does that make any sense?

« Last Edit: February 17, 2012, 01:47:37 pm by iowabow »
Logged
(:::.) The ABO path is a new frontier to the past!

Offline Tower

  • Member
  • Posts: 2,298
Re: time to call it a night
« Reply #5 on: February 17, 2012, 02:40:56 pm »
Makes prefect sense, it works well in percussion thinning.
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #6 on: February 17, 2012, 03:19:27 pm »
Ok cool then I must be heading down the right path. HMMMMM any tips as well?
Logged
(:::.) The ABO path is a new frontier to the past!

Offline Will H

  • Member
  • Posts: 2,120
Re: time to call it a night
« Reply #7 on: February 17, 2012, 04:01:54 pm »
Lookin good John. Basically what your figuring out is isolated platforms. It really makes all the difference if you wanna get em real thin ;)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: time to call it a night
« Reply #8 on: February 18, 2012, 12:22:40 am »
Good work there.. A good nights work

Cipriano
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: time to call it a night
« Reply #9 on: February 18, 2012, 12:36:36 am »
Man that is Very Cool...

And darned if I didn't understand what you said...
Don't know if I can do it, but I understood it...
And that in itself is something.

:)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #10 on: February 18, 2012, 11:19:14 am »
Ok this is getting fun.  I am starting to really build some prdictable and consistant flake removal patterns without steps yet.  I must have been switching too soon to a smaller bopper before.  Also I am really powering into the stone at an angle.  I marked the 5 flakes I took early this morning that create that collateral flaking pattern look. I plan on thinning this till it breaks or it is better than any others. 

Logged
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #11 on: February 18, 2012, 11:38:16 am »
Here is a native preform my neighbor gave me. 

Logged
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #12 on: February 18, 2012, 12:18:28 pm »
Ok I am not sure I can do better 6mm thick and 48mm wide is that 8:1?



Logged
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: time to call it a night
« Reply #13 on: February 18, 2012, 12:29:07 pm »
Maybe I could shoot a few flakes from the base and thin the center but I am going to set it aside and work on another and try to beat it. You cant see it but I am jumping up and down doing a victory dance.
Logged
(:::.) The ABO path is a new frontier to the past!

Offline Tower

  • Member
  • Posts: 2,298
Re: time to call it a night
« Reply #14 on: February 18, 2012, 02:02:07 pm »
I like that profile! Great job!
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!
Pages: [1] 2
« previous next »