elk antler bow

[possum]

I'm starting on an elk antler bow.  Well, OK, I started a long time ago but life pulled me away and now I'll have more time.     I need information on how to splice the two pieces together and how much sinew someone would guess it would take.  The pieces are @20" each.  I was thinking maybe a butt splice with another piece lapped over both or maybe some interlocking type with another piece lapped over to also help build up the handle a bit.
As for the sinew, I have @13 deer leg sinew and @20 back sinew.  I had more back sinew yesterday but my dog got on the table as they were drying   Anyone want a dumb stupid boxer?

Here's a page I made when I startedhttp://www.geocities.com/sp06di/elkbowpage.html

[Dane]

Possum, I heard that dogs love eating sinew.

I assume you are making the bow with a wooden core? My understanding is a butt joint is all that you will need, assuming the horn will be on the back of the bow. That is the kind I am using for an Asiatic composite I have started already.

[possum]

This is just an antler and sinew, no core.

possum

[1/2primitive]

I was interested in these kinds of bows when I saw them in TBB, I will be checking in on this bow.
     Sean

[welch2]

I havn't tried antler ,but I have made a few like that with horn and sinew.
      That's the way I do it.Butt joint at the handle ,tooth the entire back of both horns .Then make a short 3" piece to overlap the butt joint at the handle,and tooth both sides of the short piece.Drill a small hole in both limbs and matching holes in the short handle piece. Next I peg it all together with hand made horn dowels and hide glue . I leave the pegs just a little bit proud ,and sinew wrap the handle with one layer to come up flush with the pegs.

   After the assembled limbs have dried for a few weeks I put on the first sinew layer ,after 4 layers of sinew these little bows will pull into a 'C' so wrapping the limbs with sinew is usually necessary. Some of them end up completely wrapped.

Ralph