« previous next »
Pages: [1]

Author Topic: Mutt bow  (Read 2671 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Mutt bow
« on: January 03, 2012, 01:41:28 am »
I like the idea of Molle bows, but I have yet to get the guts up to try such short and wide working limbs.  How about if I make something about 64" long with the last 12" being narrowed and stiff, and the working limbs about 1 1/4 wide.  Slightly narrowed stiff handle and 1 1/2 inch fadeouts.  28" draw length and shooting for about 60# draw.  I have a piece of really clean hickory board in mind for this bow.  I will probably back the working limbs with rawhide. 

Am I completely wasting the advantage of stiff/narrow tips by making the bow longer?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bubby

  • Member
  • Posts: 11,054
Re: Mutt bow
« Reply #1 on: January 03, 2012, 04:30:15 am »
that otta work, i built a molly 64" ntn, and it shoots nice and drives them deep, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Mutt bow
« Reply #2 on: January 03, 2012, 09:19:01 am »
  I never built a long MOLLE but know people and have seen there bows. The looked and shot well as far as I know.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

blackhawk

  • Guest
Re: Mutt bow
« Reply #3 on: January 03, 2012, 01:37:02 pm »
Remember this one i posted back in early dec?  Maybe it'll give ya some influence and help. Go to page two where I give a lentghy explanation on layout. Its similiar to what your asking about.

 http://www.primitivearcher.com/smf/index.php/topic,29343.0.html
Logged

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: Mutt bow
« Reply #4 on: January 03, 2012, 04:23:41 pm »
be careful to make the inner limbs too short, or make them very wide. I have had problems with the molle design chrysaling badly in the past, and no longer like the design although they shoot incredibly well...

Good luck!

Jon
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Mutt bow
« Reply #5 on: January 03, 2012, 06:59:45 pm »
I double checked the piece of hickory I had in mind.  It's actually going to afford almost 1 3/4" width at the fadeouts.  Not the full 2" that Blackhawk mentions in the link above to the hackberry masterpiece he showed. 

I went back and re-read his posting of that bow.  I really liked it at the time, but had not read much about the details. (Too busy looking at bow porn to read about her turn-offs, astrological sign, and such)  Good comment about making sure there is NO limb twist, Blackhawk, I would have missed that and learned a hard lesson. 

I did notice that there are pin sized borer holes in a few spots on this piece of wood.  They go diagonally thru the grain in places and follow the growth rings in other places.  Since I am backing with rawhide, I'm not terribly concerned and will just pump 'em fulla cyanoacrylic glue.  I'll be extra careful to make sure I do not have a bug hole, if at all possible, in the outer levers. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Mutt bow
« Reply #6 on: January 03, 2012, 07:37:18 pm »
Quote from: JW_Halverson on January 03, 2012, 06:59:45 pm
I double checked the piece of hickory I had in mind.  It's actually going to afford almost 1 3/4" width at the fadeouts.  Not the full 2" that Blackhawk mentions in the link above to the hackberry masterpiece he showed. 

 

Oh, you mean his PEARL DRUMS masterpiece J-dub-yah? Yah, that is a beaut for sure. Hackberry is KILLER bow wood, my favorite whitewood by far. You should get a stave.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Mutt bow
« Reply #7 on: January 03, 2012, 07:41:18 pm »
It was named in error, I am sure, PD!  Now go beat your high-hat!

I've worked with hackberry in the past and have come to love that wood.  I will never turn down a hackberry stave!  I hvae one piece left from a tree that produced 4 high quality bows despite my best efforts to screw 'em up.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JonW

  • Member
  • Posts: 1,906
Re: Mutt bow
« Reply #8 on: January 03, 2012, 07:58:17 pm »
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Mutt bow
« Reply #9 on: January 03, 2012, 07:59:39 pm »
j w, get ahold of Rich," halfeye", i think he's the resident xpert on molly's, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

blackhawk

  • Guest
Re: Mutt bow
« Reply #10 on: January 03, 2012, 08:21:28 pm »
1 3/4" should be wide enough for hickory and your length cus hickory is denser than hackberry. That's if your using a similar design. Hope those holes aren't to nasty. Thanks for the compliment on the hackberry...and sorry for making Chris' head even bigger...its the last time I name a bow after him...I promise ;)  :laugh:
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Mutt bow
« Reply #11 on: January 04, 2012, 02:25:31 pm »
Chris's head gets any bigger and he won't fit in here to post.  Maybe that's not a bad thing.  >:D
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: [1]
« previous next »