« previous next »
Pages: [1] 2

Author Topic: Ever try...  (Read 4667 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Ever try...
« on: November 21, 2011, 10:31:52 am »
shaping your thickness tapers in while the bow is on your form? I heat in 3" of full length reflex on most every bow I build. Obviously some of the twist comes back, some of the reflex and deflex comes back after you remove clamps. The other day I thought I would try something different, for me anyhow. I left the center and tip clamps alone and worked my tapers in while on form, WOW! That was about as easy as I have ever had it. The tapers where very even and flat right off the bat. It may sound silly, but I never thought of it before. I just unclamped and tipped my rasp and scraper according to the limb twist. Now, I unclamp and it twists where it wants while keeping the perfect thickness taper. Maybe Im just a slow learner and everybody else already does this? Let me know how slow I am! :laugh:
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Ever try...
« Reply #1 on: November 21, 2011, 09:30:06 pm »
Each piece of wood has its own preference but hickory likes your plan generally speaking!
Keep it simple keep it fun !!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ever try...
« Reply #2 on: November 22, 2011, 08:40:41 am »
Wow, I expected a few more to say they do the same. It works on all wood Guy. A good taper is a good taper on any wood. Its the #1 reason bows break, or stay together.....in my book anywho.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Ever try...
« Reply #3 on: November 22, 2011, 08:52:38 am »
I don't use a form PD, so I couldn't comment.  I agree that taper problems account for most hinging issues and I'd do better if I paid more attention to it.  When I teach people to build bows I watch it like a hawk, but on my own bows  I'm less vigilant for some reason and it sometimes costs me.  Your idea sounds like a good one to me.

George
Logged
St Paul, TX

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ever try...
« Reply #4 on: November 22, 2011, 09:05:33 am »
I used to simply clamp my handle area down in my vice and just go to town tipping my tools one way or another trying to maintain evenness. My horrible impatience problem got me to start working a bow that was resting (2 days later) after heat forming. It didn't hurt the integrity of the wood, but the bow came off the form two days later almost perfectly tillered already. That got the ball rolling and my mind working. I start all of mine the same way now. "Knock on wood", I haven't broke a bow in my last 8-10 efforts with various woods.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline k-hat

  • Member
  • Posts: 1,058
Re: Ever try...
« Reply #5 on: November 22, 2011, 10:54:11 am »
Sounds genius to me!  Gonna add this to my process, but i guess i need to make a full length form first ;)
Logged

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Ever try...
« Reply #6 on: November 22, 2011, 11:43:33 am »
Pearl
some staves have backs that are not so flat ,they can be a little hard to read clamped down , maybe its just Me !!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ever try...
« Reply #7 on: November 22, 2011, 12:39:41 pm »
True, some common sense may have to play a role here.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Ever try...
« Reply #8 on: November 22, 2011, 08:09:37 pm »
  Add refrex while green useing no heat theres no need for a (fourm Caul) I hav'nt broke a bow it the last 75. Sounds like your building glass bows instead of selfbows.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Kpete

  • Member
  • Posts: 238
Re: Ever try...
« Reply #9 on: November 22, 2011, 09:38:51 pm »
If common sense were a requirement, ahh, we would be bowling.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Ever try...
« Reply #10 on: December 10, 2011, 10:22:46 am »
Oddly enough the method I asked about above worked like a charm on the nasty build along bow I posted. No glass, just osage. Its hard for me to see my taper when the belly is flat and the back goes all over. This keeps it flat and sure makes a good taper easy. Good tapers make good tillers Im thinking.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Ever try...
« Reply #11 on: December 10, 2011, 02:52:31 pm »
It's all ways good to see someone that finds a different approach to doing things that just fits them!
Have fun and enjoy yourself !
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Weylin

  • Member
  • Posts: 2,296
Re: Ever try...
« Reply #12 on: December 10, 2011, 02:58:55 pm »
This is just a thought from an inexperienced bowyer, so take it with a grain of salt. If I had it clamped to a form the whole time I was working the bow down I would be really nervous about my eyes tricking me.When I'm trying to achieve a good taper I need to run the bow through my fingers constantly to feel the taper. I'm not sure I would trust my eyes only when trying to establish a good taper.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Ever try...
« Reply #13 on: December 10, 2011, 04:48:25 pm »
Hmmm, I dunno but I always try to taper while tillering.  First with floor tillering and then with a more refined method of tillering.

Tapering by "eye" on the form seems like a short cut.  But if it saves you time then go for it.  :)
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline randman

  • Member
  • Posts: 647
Re: Ever try...
« Reply #14 on: December 10, 2011, 05:23:10 pm »
I have been using a simple (primitive) marking gauge that guides along the crest of the back surface and makes a thickness mark along the side of the stave. 5/8" and 1/2". That way I have thickness guide mark I can hog down to quickly and then fine tune the thickness taper when I tiller. Both sides of the stave are marked related to the back on that side so the thickness automatically rolls with the twists and follows any roller coaster. The gauge thingy is nothing new. Just a revised joiners or cabinet makers marking gauge and it has helped my tillering a lot. I'll have to post it sometime as "tillering gizmo II".
Logged
Beauty is in the eye of the beer holder.
Pages: [1] 2
« previous next »