Author Topic: Arrow rest ideas for working handle bows???  (Read 6282 times)

0 Members and 2 Guests are viewing this topic.

TurtleCreek

  • Guest
Arrow rest ideas for working handle bows???
« on: November 08, 2011, 10:15:14 pm »
  I have one in the works right now and I plan on using a leather wedge as an arrow rest/shelf.  Nothing too big, but just enough for the arrow.  I thought leather would be the way to go because it will have some give and will flex with the handle.  If anyone has any experience or advice on this, I would appreciate it.  Also, if any of you have pics of the arrow rests/shelves you have incorporated into a working handle bow, that would be great. Thanks.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Arrow rest ideas for working handle bows???
« Reply #1 on: November 08, 2011, 10:23:09 pm »
Stacked saddle leather is my favorite. You can put a roll or two at the top of your grip leather to form a shelf area. I have two bendy bows with that type.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

blackhawk

  • Guest
Re: Arrow rest ideas for working handle bows???
« Reply #2 on: November 08, 2011, 11:44:38 pm »
My knuckle works great ;)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Arrow rest ideas for working handle bows???
« Reply #3 on: November 09, 2011, 12:35:56 am »
I use a floppy rest on most of my bows any more. They almost all bend a bit in the handle at full draw.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gordon

  • Member
  • Posts: 3,299
Re: Arrow rest ideas for working handle bows???
« Reply #4 on: November 09, 2011, 03:34:12 am »
I carve a small rest out of a small block of wood or a golf tee. Here's a picture of one on a bendy handle vine maple bow.



Gordon

TurtleCreek

  • Guest
Re: Arrow rest ideas for working handle bows???
« Reply #5 on: November 09, 2011, 05:05:46 am »
Looks nice Gordon, thanks for the pic.  If I use wood and keep it small like that, is there any worry about it popping off since the handle bends?

Offline Dazv

  • Member
  • Posts: 472
Re: Arrow rest ideas for working handle bows???
« Reply #6 on: November 09, 2011, 07:51:02 am »
Looks nice Gordon, thanks for the pic.  If I use wood and keep it small like that, is there any worry about it popping off since the handle bends?
Somthing that small i think there is very little chance of it coming off. Even it it dose it dose not really matter as the handle wrap will keep it on.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Arrow rest ideas for working handle bows???
« Reply #7 on: November 09, 2011, 11:42:41 am »
If the rest was on the back or belly of the bow it would have a chance of coming off because of the movement of the wood(stretching and compressing) when the bow is drawn. There is very little movement along the sides so the rest should adhere well and remain that way on the sides of the bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Arrow rest ideas for working handle bows???
« Reply #8 on: November 09, 2011, 01:04:19 pm »
My knuckle works great ;)
I prefer my knuckle, as yours is never about when I need it ::)
Del
Health warning, these posts may contain traces of nut.

Offline HighEagle

  • Member
  • Posts: 227
Re: Arrow rest ideas for working handle bows???
« Reply #9 on: November 09, 2011, 03:24:40 pm »

  Top 2 bottom

Leather wrap Off the Knuckle

Hemp wrapped leather wedge  left and right side

Leather wrap leather collar

Hemp wrap leather collar

All bows can be shot left or right, Chuck



Armstrong, BC

Offline HighEagle

  • Member
  • Posts: 227
Re: Arrow rest ideas for working handle bows???
« Reply #10 on: November 09, 2011, 05:21:31 pm »
Brain tanned buckskin wrap with floppy rest
 
Hemp wrap ,  leather collar...  Take care, Chuck

Armstrong, BC

Offline Gordon

  • Member
  • Posts: 3,299
Re: Arrow rest ideas for working handle bows???
« Reply #11 on: November 09, 2011, 05:58:03 pm »
 
Quote
If I use wood and keep it small like that, is there any worry about it popping off since the handle bends?

I've made a lot of bendy handle bows this way and have never had a rest pop off.
Gordon

TurtleCreek

  • Guest
Re: Arrow rest ideas for working handle bows???
« Reply #12 on: November 09, 2011, 07:38:36 pm »
  Thanks a lot guys!  Great pics HighEagle, a lot of good ideas.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Set Happens!
If you ain't breakin' you ain't makin!

Offline Keenan

  • Member
  • Posts: 4,824
Re: Arrow rest ideas for working handle bows???
« Reply #14 on: November 10, 2011, 12:59:51 am »
 I glue leather scraps together, then shape them down to a wedge and cut a horizontal slit in the leather wrap, stretch slightly with file end and insert the wedge added with a few drops of super glue

http://s30.photobucket.com/albums/c326/bornagainprimitve/DSC_0068_3.jpg
« Last Edit: November 10, 2011, 01:04:37 am by Keenan »