Author Topic: Pinhead Clay  (Read 3218 times)

0 Members and 1 Guest are viewing this topic.

Offline piper

  • Member
  • Posts: 344
Pinhead Clay
« on: October 20, 2011, 10:26:41 pm »
playing around in the slab pile today....

this is how I make a point from a square edge slab...(The Earl Bird way)...first a nice slab and then I cut the perform with a glass cutter





then I work it from the square edge one side at a time





then go to the grinder to remove all the deltas from this past





then past two



remove more deltas



now she is getting thin



work the edge and notch





wax and wallah you have a clay for the keeper case







I hope you like the deep south clay point...........thanks for looking............................Curt
It's hard to ride two horses when you only have one ass

                     Western North Carolina

Offline Blacktail

  • Member
  • Posts: 1,432
Re: Pinhead Clay
« Reply #1 on: October 20, 2011, 11:16:54 pm »
wow,that is some nice rock...and you really did a great job...john

Offline RickB

  • Member
  • Posts: 301
Re: Pinhead Clay
« Reply #2 on: October 20, 2011, 11:58:18 pm »
Curt, you did a fine job on that point. Rick B

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Pinhead Clay
« Reply #3 on: October 21, 2011, 01:15:25 am »
 Sweet, Curt, I just learned something new. Thanks! And I have some of that same Pinhead. ;)
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: Pinhead Clay
« Reply #4 on: October 21, 2011, 06:48:04 am »
beautiful
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Pinhead Clay
« Reply #5 on: October 21, 2011, 08:42:56 am »
Beautiful work,very nice. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Tower

  • Member
  • Posts: 2,298
Re: Pinhead Clay
« Reply #6 on: October 21, 2011, 09:02:09 am »
Nice step by step! I never thought about grinding the deltas. 
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline Bone pile

  • Member
  • Posts: 1,491
Re: Pinhead Clay
« Reply #7 on: October 21, 2011, 09:11:40 am »
you da man Curt,nice un'
Roger
Venice Florida

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Pinhead Clay
« Reply #8 on: October 21, 2011, 08:04:20 pm »
Is your 2nd pass over top of the first pass after the frind ?. On the same side?
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline piper

  • Member
  • Posts: 344
Re: Pinhead Clay
« Reply #9 on: October 22, 2011, 11:15:31 am »
 Good morning ALL ......thanks for all the nice words......I love good coral
Mullet if you have any extra coral like this I will take a flat rate box FULL..............
Nugget after each pass I will first grind off all deltas then make the next pass over the last pass sometime using the ridges from the last pass to get longer flaks IF  a longer flak is needed...hope this helps...................Thanks Curt
It's hard to ride two horses when you only have one ass

                     Western North Carolina

Offline theothertower

  • Member
  • Posts: 1
Re: Pinhead Clay
« Reply #10 on: October 22, 2011, 12:10:50 pm »
Nice point!   :o

Offline bubby

  • Member
  • Posts: 11,054
Re: Pinhead Clay
« Reply #11 on: October 24, 2011, 07:10:23 pm »
nice do- a- long, there's a guy around here that uses the wet sanderwhen the point is almost finished, then hit's the edges with the sander, then makes the final sharpining chipping, man the edges come out beautiful, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bareshaft12

  • Member
  • Posts: 118
Re: Pinhead Clay
« Reply #12 on: October 24, 2011, 09:22:22 pm »
 :o That is a sweet heart point man,killer thin awesome!!!

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Pinhead Clay
« Reply #13 on: October 25, 2011, 01:40:38 pm »
Dang that's a HUGH point.  Nice work.  I'd like to see the tool pics added.  I've never heard of this type of knapping before.  I just barrowed a tile saw and cut some geodes w/ it that I thought if I could cut it into a slab I could maybe knap it.  Anybody ever try that?  Sweet point Piper, dpgratz
(:::.)    Osage music played daily. :)

Offline jcinpc

  • Member
  • Posts: 183
Re: Pinhead Clay
« Reply #14 on: October 26, 2011, 12:53:30 am »
Awesome point Curt, if you or Eddie has any of that quality of Pinhead SIT ON IT, the source is gone gone gone. I have refused sales for months now. I am sitting on what I have left until I can find another source. Quality top shelf pinhead is rare as it is, now its endangered,lol
put that point in your roaster to bring some pink back and it wont blow up