« previous next »
Pages: [1]

Author Topic: Is this too knobbly?  (Read 9785 times)

0 Members and 1 Guest are viewing this topic.

SimonUK

  • Guest
Is this too knobbly?
« on: July 10, 2007, 06:17:08 pm »
Can I make a bow out of this? Or should I stop wasting my time now? There are several knobbles on this stave, this is the worst of them. There are also some cracks on the back, I'm not sure how deep they go... how can I get glue into them?

http://s166.photobucket.com/albums/u118/simon2468/?action=view&current=HPIM0098.jpg
http://s166.photobucket.com/albums/u118/simon2468/?action=view&current=HPIM0106.jpg
http://s166.photobucket.com/albums/u118/simon2468/?action=view&current=HPIM0101.jpg

Thanks guys.
Logged

Offline Yeomanbowman

  • Member
  • Posts: 283
    • warbowwales
Re: Is this too knobbly?
« Reply #1 on: July 10, 2007, 06:44:01 pm »
Hello Simon,
None of that 'character' looks terminal to me, try really cheap and runny super glue in the shakes or heated Araldite(to thin it) if they are big.  Yew's to good to waste, I'd go for it.  Good luck.
« Last Edit: July 11, 2007, 05:45:24 am by Yeomanbowman »
Logged

SimonUK

  • Guest
Re: Is this too knobbly?
« Reply #2 on: July 10, 2007, 06:51:53 pm »
Thanks Yeoman. Wouldn't superglue or araldite be too brittle once set?
Logged

duffontap

  • Guest
Re: Is this too knobbly?
« Reply #3 on: July 10, 2007, 07:23:42 pm »
Quote from: SimonUK on July 10, 2007, 06:51:53 pm
Thanks Yeoman. Wouldn't superglue or araldite be too brittle once set?

Nope.  Everyone's doing it man.

           J. D.
Logged

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Is this too knobbly?
« Reply #4 on: July 10, 2007, 07:25:10 pm »
Good charector wood you have there. If the checks dont run to deep you should have a really good stave. Make sure to leave extra wood arround the knots. Knots have no worth when it comes to wood!
Logged
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

SimonUK

  • Guest
Re: Is this too knobbly?
« Reply #5 on: July 10, 2007, 09:23:08 pm »
Thanks guys, runny superglue sounds a good idea then. Maybe I could poke it into the shakes with some fuse wire then clamp it closed.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Is this too knobbly?
« Reply #6 on: July 11, 2007, 12:00:59 am »
Simon, That looks like a fun yew stave to me. If nothing else, you will learn bundles from it. Just take your time, don't get frustrated and put it down when you do.  Will you post a pic of the complete stave?   Pat

ps. Super glue is a godsend! In the checks(or shakes) in the belly go in sessions. If you try to fill each all at once the glue doesn't cure well. I'll add some glue and let it set before adding more. Do this as you reduce the belly. If the voids are severe, I use fine sawdust as a filler along with the super glue. Having a fine needle handy helps get rid of air bubbles in the glue down in the cracks. They are bad!   
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

SimonUK

  • Guest
Re: Is this too knobbly?
« Reply #7 on: July 11, 2007, 06:41:15 am »
Thanks Pat, here's the whole stave. There are few knots too which I hope I can cope with.
http://s166.photobucket.com/albums/u118/simon2468/?action=view&current=HPIM0108.jpg
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Is this too knobbly?
« Reply #8 on: July 11, 2007, 10:25:26 am »
Looks good to me! ;D  If you don't want it, send it to me! ;)   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »