Author Topic: stave bow  (Read 4289 times)

0 Members and 1 Guest are viewing this topic.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
stave bow
« on: September 06, 2011, 03:16:11 pm »
finished a crepe myrtle stave bow today , this makes five CM staves . wanted to see if small diameter limbs would do well . here is a 59 inch stave from a 1 1/4 inch limb , width is 1 1/8th out of the fades to 1/2 inch pin nocks . 51 lbs at 28 inches , stained with green food coloring and ebony tips and handle.this one had a little character and a slight deflex midlimb on one , i left it all natural no heating

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: stave bow
« Reply #1 on: September 06, 2011, 03:19:40 pm »
Nice bow! I like the stain job loos like a swamp bow :D How is the performance on the smaller diameter stave?

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

blackhawk

  • Guest
Re: stave bow
« Reply #2 on: September 06, 2011, 03:28:02 pm »
That's awesome ken. Great job on that one with so little to work with dimension wise.  :D

I don't like the color green personally but that finish does look cool.  ;)

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: stave bow
« Reply #3 on: September 06, 2011, 03:32:59 pm »
Ken that bow looks good and flat.  Is it fast?  does not look like it has much string follow... Great job again with very little wood..  8)
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: stave bow
« Reply #4 on: September 06, 2011, 03:33:07 pm »
Nice, clean and simple.
That's a good poundage and draw from a small diameter stave.
Del
Health warning, these posts may contain traces of nut.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: stave bow
« Reply #5 on: September 06, 2011, 03:39:34 pm »
thanks gentlemen , the cast and performance matches any that i have built . this stuff truly amazes me.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: stave bow
« Reply #6 on: September 06, 2011, 04:29:07 pm »
Nice bow Ken. You said after 100 and 101 you were taking a break?......................... That was a quick break man!
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline half eye

  • Member
  • Posts: 3,300
Re: stave bow
« Reply #7 on: September 06, 2011, 05:22:29 pm »
Absolutely deer killin sweet.....ya really makin it LOOK easy.
rich

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: stave bow
« Reply #8 on: September 06, 2011, 05:52:38 pm »
Thanks to you, Ken, I'm scoping out people's front yards for bow wood now.  That's another great looking stick, man.
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: stave bow
« Reply #9 on: September 06, 2011, 10:57:59 pm »
thanks pearls one or two here and there is a break for me !!
thanks Rich you taught me well . lol
thanks big jon , you will like it if ya can find some
thanks Scott , me too

Offline johnston

  • Member
  • Posts: 976
Re: stave bow
« Reply #10 on: September 06, 2011, 11:11:38 pm »
Ken you build really sweet bows and this one is no exception.
I have found a source for crepe myrtle and plan to cut about a dozen staves in the next couple of days. Anything special about curing it?

Lane

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: stave bow
« Reply #11 on: September 07, 2011, 12:48:17 am »
I like the green.  Great early season camo!
Matt Wirwicki
Owosso, MI

Offline Arrowind

  • Member
  • Posts: 1,428
Re: stave bow
« Reply #12 on: September 07, 2011, 01:23:14 am »
Awesome.  Tiller looks great.  I like the "swamp bow" colors too.  Very coooooooool.
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: stave bow
« Reply #13 on: September 07, 2011, 06:51:26 am »
thanks Lane , it seasons well ive been leavin the bark on till im ready to use it however mine was winter cut so if you can peel the bark i would go for it , splitting is easy and fast , ive just been sealing the ends and bustin them in half
thanks Matt ,
thnaks Arrowind

Offline BowRaven

  • Member
  • Posts: 4
Re: stave bow
« Reply #14 on: September 07, 2011, 01:06:49 pm »
Ken, I have quite a few CM trunks and limbs I cut and sealed this spring. I got talked outta using them for bow wood at another site. You have inspired me. can you give me some rough techniques? Do you just get the bark off and that is the back like other white woods? looks like you carry the width pretty far down before you narrow? Is the thickness a constant taper or flat?