« previous next »
Pages: [1]

Author Topic: Backing question  (Read 1573 times)

0 Members and 1 Guest are viewing this topic.

Offline frankg

  • Member
  • Posts: 107
Backing question
« on: September 02, 2011, 02:40:15 pm »
How would 1/8" oak veneer be as a backing ? And is Titebond III good enough for gluing up ?
Logged
South of Klamath Falls OR , North of Calif border .

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing question
« Reply #1 on: September 02, 2011, 03:06:16 pm »
generally red oak is not a great choice for backing, i've used white oak and had great results, but i ripped it from a board so i dont know about veneer but i pesonally wouldn't use it. All the tight bond glues will work , Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline frankg

  • Member
  • Posts: 107
Re: Backing question
« Reply #2 on: September 02, 2011, 03:24:22 pm »
Ok .

Another question , can a backing be spliced at center of handle ? I have some hickory gunstock trims from top of longrifle barrel channel that I could run through planer. They are 2" wide and 43" long.
Logged
South of Klamath Falls OR , North of Calif border .

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Backing question
« Reply #3 on: September 02, 2011, 03:49:52 pm »
They can be spliced with no problems.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing question
« Reply #4 on: September 02, 2011, 08:53:21 pm »
yeah you can splice it, i think robustus shows some various splices in the how to's,. Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline frankg

  • Member
  • Posts: 107
Re: Backing question
« Reply #5 on: September 02, 2011, 09:05:21 pm »
Thanks guys ! I cut strips from Hickory left overs from a gunstock , planed and glued up with TBIII .Grain is vertical in strips and qrtr sawn on bow , should be stout .
Logged
South of Klamath Falls OR , North of Calif border .
Pages: [1]
« previous next »