« previous next »
Pages: [1]

Author Topic: sharpening scrapers  (Read 3064 times)

0 Members and 1 Guest are viewing this topic.

Offline seabass

  • Member
  • Posts: 2,267
sharpening scrapers
« on: July 20, 2011, 03:48:56 pm »
hey guys,what do you use for sharpening your scrapers.i don't want to buy a burnishing tool.is there another way to do it?thanks,steve
Logged
Middletown,Ohio

Offline dbb

  • Member
  • Posts: 745
Re: sharpening scrapers
« Reply #1 on: July 20, 2011, 04:06:06 pm »
I use the uncut end near the handle of a round or halfround file,it works ok.

/Mikael
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline seabass

  • Member
  • Posts: 2,267
Re: sharpening scrapers
« Reply #2 on: July 20, 2011, 04:10:44 pm »
thanks for the info dbb.
Logged
Middletown,Ohio

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: sharpening scrapers
« Reply #3 on: July 20, 2011, 04:14:22 pm »
Seabass
You can use any hard steel preferably round (older screw drivers are fairly hard) to burnish with .
But most of us are not using cabinet scrapers, just a piece of steel that is ground leaving the burr edge on it to scrape with ,to much trouble to go thru all that other work!!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: sharpening scrapers
« Reply #4 on: July 20, 2011, 04:19:27 pm »
A round shanked screwdriver works well.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cracker

  • Member
  • Posts: 3,123
Re: sharpening scrapers
« Reply #5 on: July 20, 2011, 04:41:03 pm »
What BG said. I have a giant hacksaw blade like goes in a motor driven hacksaw. Works Great and free to boot.
Logged
If we can't help each other what is the point of being here?

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: sharpening scrapers
« Reply #6 on: July 20, 2011, 05:08:17 pm »
There's loads of good videos on Youtube about sharpening scapers, mind some are a bit too fiddly for thier own good.
(I use a BIG screwdriver shank).
Del
Logged
Health warning, these posts may contain traces of nut.

Offline seabass

  • Member
  • Posts: 2,267
Re: sharpening scrapers
« Reply #7 on: July 20, 2011, 05:47:53 pm »
thanks everyone.looks like i'll be using the screwdriver.the burnishing tool looks like it is just a round piece of steel shoved in a handle.i didn't want to pay the 15 bucks for it.i knew you guys would have a better way.thanks again,steve
Logged
Middletown,Ohio

Offline Dauntless

  • Member
  • Posts: 282
Re: sharpening scrapers
« Reply #8 on: July 20, 2011, 09:20:24 pm »
I bought a carbide rod tool from lee valley.  Under 10$ I think, made specifically for sharpening scrapers.  I also use it to burnish bows and metal.

Might have been a gift, it really fits the profile: something you wouldn't buy but would be useful.
Logged
The starving grad student with too many hobbies.

Offline swamp monkey

  • Member
  • Posts: 784
Re: sharpening scrapers
« Reply #9 on: July 21, 2011, 11:28:17 pm »
flat mill file then the screwdriver works just fine. 
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: sharpening scrapers
« Reply #10 on: July 22, 2011, 08:52:43 am »
I just set the flat and lenth wise on my belt sander,never burnshed one in my life,well maybe one and it was way to much trouble. :) :) :) Takes about 10 seconds on the sander,worn out belt works best. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline seabass

  • Member
  • Posts: 2,267
Re: sharpening scrapers
« Reply #11 on: July 22, 2011, 12:50:08 pm »
thanks everyone.i got them sharpened yesterday.thanks again,steve
Logged
Middletown,Ohio

Offline PatM

  • Member
  • Posts: 6,737
Re: sharpening scrapers
« Reply #12 on: July 22, 2011, 07:48:01 pm »
I just use a large mill file and run the scraper lengthwise down the file a couple of times. That puts a bur on either side. Of course it takes a bit off the scraper but a very minimal amount.
Logged

Offline seabass

  • Member
  • Posts: 2,267
Re: sharpening scrapers
« Reply #13 on: July 22, 2011, 08:59:58 pm »
that's what i did PatM.i ran it down a file,then burnished with the screwdriver.worked like a charm.thanks guys,steve
Logged
Middletown,Ohio
Pages: [1]
« previous next »