« previous next »
Pages: [1] 2 3

Author Topic: 160lb Laminate bow finished - Update page 3  (Read 28908 times)

0 Members and 1 Guest are viewing this topic.

Offline Ian.

  • Member
  • Posts: 470
160lb Laminate bow finished - Update page 3
« on: May 21, 2011, 04:22:33 pm »
Hi Everyone

To keep the momentum going from the last two monster Elm bows that were posted recently I though I would share this bow with everyone, it marks a bit of a mile stone I set my self a goal a few years ago to one day pull my bodyweight, I have struggled to make a bow of this weight, a mix of poor design and poor timber has made hitting 130lb difficult let along anything over 140, after changing a few things and by chance buying some very good maple in a pile of Elm I managed it. Pictures of me drawing it will be posted in a few days when my arms feel up to it.

Specs   Maple/Ipe/Hickory  160lb at 32 about 76" long.



« Last Edit: May 08, 2012, 05:58:37 pm by Ian. »
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline Dag

  • Member
  • Posts: 128
    • Warbow Trials
Re: 160lb Laminate bow finished
« Reply #1 on: May 21, 2011, 04:30:39 pm »
WHOA! :o  Thats awesome! Great job Ian!  How wide is it at the handle?
Logged

HatchA

  • Guest
Re: 160lb Laminate bow finished
« Reply #2 on: May 21, 2011, 04:31:48 pm »
160lbs???

Rather you than me :o
Logged

Offline Ian.

  • Member
  • Posts: 470
Re: 160lb Laminate bow finished
« Reply #3 on: May 21, 2011, 04:53:15 pm »
Thanks

The handle is 37/31 tips about 14/14
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: 160lb Laminate bow finished
« Reply #4 on: May 21, 2011, 05:43:48 pm »
Thats a very nice tiller there!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: 160lb Laminate bow finished
« Reply #5 on: May 21, 2011, 06:00:33 pm »
GREAT!
Logged
Frank from Germany...

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 160lb Laminate bow finished
« Reply #6 on: May 21, 2011, 07:46:42 pm »
great job, hopefully once i order the ff and short string tiller mine i will also keep the momentum going, along with a osge warbow im working on ;D
again great job
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline nidrinr

  • Member
  • Posts: 93
Re: 160lb Laminate bow finished
« Reply #7 on: May 21, 2011, 10:21:25 pm »
Very good tiller on that one!

-And impressive thing to be pulling your own body weight. If I did that I'd get close to 230#, so I guess I'm not even... You, Eirik, and I'd guess Joe. Anyone else pulling their own body weight?
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: 160lb Laminate bow finished
« Reply #8 on: May 21, 2011, 11:41:17 pm »
Nice.  Very well tillered
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 160lb Laminate bow finished
« Reply #9 on: May 22, 2011, 01:04:23 am »
nidrinr im in the same boat as you, although hopefully that will change :-\
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Badger

  • Member
  • Posts: 8,124
Re: 160lb Laminate bow finished
« Reply #10 on: May 22, 2011, 04:57:06 pm »
     Great looking bow, looking forward to the full draw. I never could figure out how not very big guys can draw so much weight. I was always very strong when it came to lifting weights even though I never worked out but I could never draw a very heavy bow, it's like I hit a wall.
Logged

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: 160lb Laminate bow finished
« Reply #11 on: May 22, 2011, 06:22:39 pm »
very nice work.
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline Ian.

  • Member
  • Posts: 470
Re: 160lb Laminate bow finished
« Reply #12 on: May 24, 2011, 01:42:29 pm »
Update, my arms felt up to the challenge today,

http://www.youtube.com/watch?v=VvUM3r8AnEg



It seems fast
« Last Edit: May 24, 2011, 07:25:41 pm by Ian. »
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline Dag

  • Member
  • Posts: 128
    • Warbow Trials
Re: 160lb Laminate bow finished
« Reply #13 on: May 24, 2011, 01:47:04 pm »
Well done man!  That is truly a great accomplishment!
Logged

Offline nidrinr

  • Member
  • Posts: 93
Re: 160lb Laminate bow finished
« Reply #14 on: May 24, 2011, 08:56:48 pm »
Nice!
Logged
Pages: [1] 2 3
« previous next »