« previous next »
Pages: 1 [2] 3 4

Author Topic: Osage Pyramid Bow Build-Along-FINISHED!  (Read 31217 times)

0 Members and 1 Guest are viewing this topic.

Offline nyarrow

  • Member
  • Posts: 67
Re: Osage Pyramid Bow Build-Along
« Reply #15 on: April 06, 2011, 09:20:43 am »
Awesome looking bows 4est. I have never seen the kerf technique. When doing so do you apply the perry reflex glue in the kerfed area?
Logged

Offline DLH

  • Member
  • Posts: 400
Re: Osage Pyramid Bow Build-Along
« Reply #16 on: April 07, 2011, 01:17:20 am »
Your bows are great 4est fell in love with them the second you started the build along that made you famous :)
Logged

Offline 4est Trekker

  • Member
  • Posts: 311
Re: Osage Pyramid Bow Build-Along
« Reply #17 on: April 07, 2011, 02:28:57 am »
nyarrow:  Yep, that's exactly right.  The glue joint holds the bend induced at glue-up.

DLH: You know, I never thought more than a few people would every use that buildalong.  It was kind of just something I did to pass the time.  I really should redo it and/or update it a bit. 
Logged
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline billy bowmaker

  • Member
  • Posts: 54
Re: Osage Pyramid Bow Build-Along
« Reply #18 on: April 10, 2011, 09:45:23 am »
this looks great, and it makes me want to see "the buildalong that made you famous"....what was that?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Osage Pyramid Bow Build-Along
« Reply #19 on: April 11, 2011, 08:18:43 pm »
yeah 4est, you should repost you're red oak build-a-long, lots of newbie's on here and it's a great, very detailed build-a-long,probablly help a lot of them out, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline johnston

  • Member
  • Posts: 976
Re: Osage Pyramid Bow Build-Along
« Reply #20 on: April 12, 2011, 01:00:39 am »
4est you have done gone and made art. Bet the thing shoots too.

About that build-a-long...Would really like to see that if you have the time.

Lane
Logged

Offline 4est Trekker

  • Member
  • Posts: 311
Re: Osage Pyramid Bow Build-Along
« Reply #21 on: April 13, 2011, 07:02:12 pm »
Thanks, all.  I'll have to see about posting a revised version of the buildalong here on PA.  I would love to help ya'll out, and just need to some to organize it a bit.  Here's a picture of the buildalong bow that is now piked to 65".  The left limb is the bottom (and thus stronger) limb.  It's heavy near the fade on the tree, but pulls into an even tiller when drawn in the hand with a low-heel grip. It's 2" short of full draw and holds 3/4" of the original 2" of reflex heated in.  The tips have been left wide and stiff in case I decide to flip the tips.  Thanks for looking!

Logged
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline DLH

  • Member
  • Posts: 400
Re: Osage Pyramid Bow Build-Along
« Reply #22 on: April 13, 2011, 10:40:20 pm »
Quote from: 4est Trekker on April 07, 2011, 02:28:57 am
nyarrow:  Yep, that's exactly right.  The glue joint holds the bend induced at glue-up.

DLH: You know, I never thought more than a few people would every use that buildalong.  It was kind of just something I did to pass the time.  I really should redo it and/or update it a bit. 

Yes that would be good your a great teacher as well. I have wondered as to how narrow red oak could go as well. Maybe include some heat treating or perry reflex to add some new techniques?
Logged

Offline Keenan

  • Member
  • Posts: 4,824
Re: Osage Pyramid Bow Build-Along
« Reply #23 on: April 13, 2011, 11:34:19 pm »
 That trade bow is looking awesome 4est. And those other bows are beauties. Nice work ;)
Logged

Offline 4est Trekker

  • Member
  • Posts: 311
Re: Osage Pyramid Bow Build-Along
« Reply #24 on: April 18, 2011, 01:12:30 am »
Howdy, folks.  Here's an update on the bow. I flipped the tips just a tiny bit using the kerf technique (i.e. I resawed the last several inches of the limb and glued in a thin rosewood lamination while inducing reflex).  I than added rosewood tip underlays and overlays.  I haven't yet roughed in the handle. 

It's shown at my full draw, which is still 2" short of the recipient's.  It's also going to come out smack dab at the bottom end of the recipient's requested weight.  I would have liked about 3-5# on this one, but I think it will do just fine.  After working it in to the recipient's full draw and shooting it a bunch at my draw length the tips are about dead even after unstringing, settling to about 1/2" of reflex when relaxed.  Not perfect, but I'm a-okay with it.  I've turned the final full draw picture sideways and cropped it so you can get a better look.  Thanks!





Top limb is on top here:













« Last Edit: April 18, 2011, 10:03:31 am by 4est Trekker »
Logged
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline bubby

  • Member
  • Posts: 11,054
Re: Osage Pyramid Bow Build-Along
« Reply #25 on: April 18, 2011, 03:00:38 am »
look's great, I know I'd take her in a heart beat, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Osage Pyramid Bow Build-Along
« Reply #26 on: April 18, 2011, 01:25:52 pm »
Awesome bow 4est. perfect for hunting or anything else... looks like you used a tapered lam in the kerf. you can use a non tapered kerf I imagine(cant do a taper to save my life) -tiller is spot on btw, excellent job on everything
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline 4est Trekker

  • Member
  • Posts: 311
Re: Osage Pyramid Bow Build-Along
« Reply #27 on: April 18, 2011, 08:00:42 pm »
Eric:  Depending on how thick your kerf cut is, you can use a straight lamination.  Actually, for this one I just created a straight lamination using a little jig (see below) I made and the tapered the end by hand on my belt sander until it fit snuggly into the base of the kerf.  I didn't really set out to create a perfect tapered lam. 

Below is a rough little mock-up of the jig I use to sand my kerf and underlay laminations thin and flat.  It's obviously not to scale, but basically the little lip keeps the lam from shooting off the belt sander while the longer part allows me to put equal pressure on the lam, preventing me from sanding a radius into it. 
___________________________________________________________________________
|                                                                                                                                 |
|                     ______________________________________________________________|
|____________| <---------------------------------- Lam rides here
_____________________________________________________________________________
             <---------------            SANDING BELT         <-------------------                                    )
Logged
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Osage Pyramid Bow Build-Along
« Reply #28 on: April 18, 2011, 10:06:04 pm »
Thanks for the tip 4est. I think I need to invest in a belt/disc sander. right now I just use my 3x21 hand belt sander upside down in a vise. I do like the idea of the kerf recurve with tropicals especially since they seem to be hard to heat bend.
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Osage Pyramid Bow Build-Along
« Reply #29 on: April 18, 2011, 11:02:53 pm »
That little ASCII sketch made it all clear, thanks.  Now you got me wanting to do this on a bow.  I may never have time to do all the tricks I have seen used on this site. 

And back to the bow itself....sweeeeeeet!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: 1 [2] 3 4
« previous next »