« previous next »
Pages: [1] 2

Author Topic: knotty yew flatbow(improved tiller)  (Read 8978 times)

0 Members and 1 Guest are viewing this topic.

youngbowyer

  • Guest
knotty yew flatbow(improved tiller)
« on: February 20, 2011, 03:11:30 pm »
Made this bow from a yew branch that had an rpi of about 25/30. The finish is danish oil and the handle wrap is hemp.
It's 54 inches long and pulls 45#@24".



« Last Edit: February 21, 2011, 04:14:58 pm by youngbowyer »
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: knotty yew flatbow
« Reply #1 on: February 20, 2011, 03:17:43 pm »
She looks pretty good but, IMO, needs more bending near the handle.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline TBod

  • Member
  • Posts: 275
Re: knotty yew flatbow
« Reply #2 on: February 20, 2011, 03:55:31 pm »
Nice!
Logged

Offline Aries

  • Member
  • Posts: 493
Re: knotty yew flatbow
« Reply #3 on: February 20, 2011, 07:19:23 pm »
That is a rockin lil bow! I see yew and ppl talk about it having that many RPI, it makes my head spin imagining trying to chase a single thin growth ring the length of that  ;D.   and ya maybe a little more bind towards the handle, but IMO if you have more wood waiting on ya, just let that baby be, and nail the tiller on the next one you make.
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

youngbowyer

  • Guest
Re: knotty yew flatbow
« Reply #4 on: February 20, 2011, 08:10:20 pm »
thanks guys, i'm already working on another yew stave. Gonna take this one rabbit or squirel hunting soon.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: knotty yew flatbow
« Reply #5 on: February 20, 2011, 08:23:11 pm »
Yeah, I'm with Pat B, you need to fade the handle down to the limb a bit quicker, the centre third of the bow doesn't seem to be flexing.
If you let more of the bow flex it will be less likely to fail, mind Yew is tough stuff.
Mighty fine bow tho', hope you don't mind the critique.
Del
Logged
Health warning, these posts may contain traces of nut.

youngbowyer

  • Guest
Re: knotty yew flatbow
« Reply #6 on: February 20, 2011, 08:27:06 pm »
I'll improve the tiller tomorrow, ill keep you guys updated. What is the max drawlength you can get with a 54 inch bow? 24" is kind of annoying to shoot with it.
Logged

Offline Keenan

  • Member
  • Posts: 4,824
Re: knotty yew flatbow
« Reply #7 on: February 20, 2011, 11:44:59 pm »
Good job Youngbowyer, As far as draw length you could get a couple more inches if you get it bending a little closer to the handle like Pat said and also needs a little more wood scraped of the outer third of the lower limb. Hope that helps. Congratulations, Looks like your well on your way. ;)
Logged

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: knotty yew flatbow
« Reply #8 on: February 21, 2011, 01:11:53 am »
Very nice.  You'll get a couple more inches of draw out of it yet.  You have taken that yew from alive to bow really quickly.  Did it take any set?

George
Logged
St Paul, TX

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: knotty yew flatbow
« Reply #9 on: February 21, 2011, 02:54:27 am »
Nice job thats a pretty one ;D
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: knotty yew flatbow
« Reply #10 on: February 21, 2011, 05:24:36 am »
Yes, as Pat says, would need more bend at the handle.
Good job on a difficult piece of wood!
Logged
Frank from Germany...

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: knotty yew flatbow
« Reply #11 on: February 21, 2011, 06:31:02 am »
Quote from: youngbowyer on February 20, 2011, 08:27:06 pm
I'll improve the tiller tomorrow, ill keep you guys updated. What is the max drawlength you can get with a 54 inch bow? 24" is kind of annoying to shoot with it.
With Yew you should get half the length of the bow without too much trouble, but you can't afford a long stiff handle on a short bow, so try to keep the grip length as short as possible.
Del
Logged
Health warning, these posts may contain traces of nut.

youngbowyer

  • Guest
Re: knotty yew flatbow
« Reply #12 on: February 21, 2011, 09:55:00 am »
I should get about 26" draw. The handle is only about 4 inches
Logged

youngbowyer

  • Guest
Re: knotty yew flatbow(improved tiller)
« Reply #13 on: February 21, 2011, 04:16:28 pm »
Here it is now, i think the upper limb can bend some more right out of the handle.




Logged

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: knotty yew flatbow(improved tiller)
« Reply #14 on: February 21, 2011, 07:03:45 pm »
Great work!!! I love it. It's good to see such young bowyers. Keep up the good work.
Logged
Rockford, MI
Pages: [1] 2
« previous next »