« previous next »
Pages: [1] 2

Author Topic: Round Hacksaw Blade For Self Nocks  (Read 7870 times)

0 Members and 1 Guest are viewing this topic.

PeteDavis

  • Guest
Round Hacksaw Blade For Self Nocks
« on: January 02, 2011, 07:44:26 pm »


Is there a preferred blade to cut in self nocks? The .05" blade looks like it will do the job.

PD
Logged

Offline NTD

  • Member
  • Posts: 1,771
Re: Round Hacksaw Blade For Self Nocks
« Reply #1 on: January 02, 2011, 07:47:28 pm »
I use the basic ceramic tile blade and then finish up with sandpaper.  Works for me ;)
« Last Edit: January 02, 2011, 08:03:07 pm by NTD »
Logged
Nate Danforth

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Round Hacksaw Blade For Self Nocks
« Reply #2 on: January 02, 2011, 08:01:27 pm »
 I use a chain saw file and a very small half-round rasp.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Round Hacksaw Blade For Self Nocks
« Reply #3 on: January 02, 2011, 08:48:05 pm »
I use a single bandsaw cut then open it with a thin blade knife and sandpaper. The tile saw works well too. I could never get a hacksaw blade or blades to work well for cutting nocks.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cracker

  • Member
  • Posts: 3,123
Re: Round Hacksaw Blade For Self Nocks
« Reply #4 on: January 02, 2011, 10:14:08 pm »
I use the saw on my pocket tool and follow up with the file on the same tool. Ron
Logged
If we can't help each other what is the point of being here?

Offline aero86

  • Member
  • Posts: 1,263
Re: Round Hacksaw Blade For Self Nocks
« Reply #5 on: January 03, 2011, 12:50:04 am »
i use the ceramic tile blade as well..
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline Rick Wallace

  • Member
  • Posts: 766
Re: Round Hacksaw Blade For Self Nocks
« Reply #6 on: January 03, 2011, 03:52:41 am »
Break a hacksaw blade in half the tape the to halves togeher. Or fix up a wooden handle. Works like a charm
Logged
U.S.ARMY '86-'91  East Milton Fl.   Dont take yourself to seriously,,No one else does

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Round Hacksaw Blade For Self Nocks
« Reply #7 on: January 03, 2011, 07:55:52 am »
I know it's not primitive but I use my Dremal tool to get the depth and close width. Then finish out with sandpaper.
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline Scowler

  • Member
  • Posts: 611
Re: Round Hacksaw Blade For Self Nocks
« Reply #8 on: January 08, 2011, 09:53:36 am »
I use a Dremal tool as well.
Logged

Offline scattershot

  • Member
  • Posts: 161
Re: Round Hacksaw Blade For Self Nocks
« Reply #9 on: January 08, 2011, 11:52:52 am »
Mine is a three step process. I start with a hacksaw, and cut to the depth of the blade. Then I follow that up with a ceramic tile blade, and a chainsaw file. The nocks turn out just the right width for me.
Logged
"Experience is just a series of non-fatal mistakes"

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Round Hacksaw Blade For Self Nocks
« Reply #10 on: January 08, 2011, 01:00:19 pm »
Bandsaw first, then a tinny round file to shape the base of the nock then an emery 'fingernail' file to shape the throat. If I do it right, I make a snap nock modeled after the nirk nock.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Round Hacksaw Blade For Self Nocks
« Reply #11 on: January 08, 2011, 02:11:26 pm »
Hi Folks,  I use a multistep process.  I have a hack saw with 3 standard blades all mounted together.  I use that to cut to depth.  I use an old broadhead sharpening file the clean up and round over the bottom edges and then use a rattail needle file to widen the bottom for a snap nock type effect.  Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Re: Round Hacksaw Blade For Self Nocks
« Reply #12 on: January 08, 2011, 04:52:33 pm »
Yep, I use the round hacksaw blade. They call it a carbide... something... blade. Sorry I don't have the exact name.  ;)

I'll generally use a normal hacksaw blade for a guiding cut then widen it with the round one.
      Sean
Logged
Dallas/Fort Worth Tx.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Round Hacksaw Blade For Self Nocks
« Reply #13 on: January 11, 2011, 06:37:13 am »
   I also use hack saw blades. I cut 3 same leanth tape together. But the center blade I face the teeth the other way just startsand cleans itself a little better.. Finish up with a file.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline mox1968

  • Member
  • Posts: 243
Re: Round Hacksaw Blade For Self Nocks
« Reply #14 on: January 11, 2011, 11:13:14 am »
tile saw then sandpaper,its also a good idea to wrap the shaft with a little masking tape prevents any splitting.
Logged
Pages: [1] 2
« previous next »