Author Topic: finishing a sinew backing  (Read 1519 times)

0 Members and 1 Guest are viewing this topic.

Offline hook

  • Member
  • Posts: 86
finishing a sinew backing
« on: December 03, 2010, 08:24:36 am »
hey guys I'm a newbie and just finished sinew backing a hickory bow with hide glue.
my question is: can you put stain on it to change the color and or sealant of some kind without messing up the glue?

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: finishing a sinew backing
« Reply #1 on: December 03, 2010, 08:50:35 am »
Yes ,just let it dry good before you do that ,and also let it dry good after you stain it,before you seal it.I seal them with Tru Oil.  :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline hook

  • Member
  • Posts: 86
Re: finishing a sinew backing
« Reply #2 on: December 03, 2010, 09:15:22 am »
water base stain or oil base stain??

Offline ohma

  • Member
  • Posts: 279
Re: finishing a sinew backing
« Reply #3 on: December 03, 2010, 11:19:07 am »
i use alchohal based dyes. then good ole tru oil.
if your not dead you are getting older so get out and shoot some arrows.