« previous next »
Pages: [1]

Author Topic: Latest Knife  (Read 9001 times)

0 Members and 1 Guest are viewing this topic.

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Latest Knife
« on: November 30, 2010, 05:36:33 pm »
Hmm.... I haven't posted anything on here in a while, so here goes-

This is my latest project:
I had been thinking about doing some inlay work on a knife handle for a while, and then I got to thinking that if I don't start something, I'll never do anything! So I got started. ;)
     The handle is hickory darkened with an ebony stain and the blade was cut out of a circular saw blade. What is the name for the piece between the blade and handle? -That part is made of cow horn.
The inlay work is various beads set into the wood in a 'moon and stars' formation. Overall, the knife is 6" long, and the blade is 2 3/4".
On this knife, I tried for the first time to do some vinework on the back of the blade. I think it turned out pretty well for my first time. :)

What are y'all's suggestions for polishing the blade? Not to a mirror finish, but a bit more than it is now.
      Sean
Logged
Dallas/Fort Worth Tx.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Latest Knife
« Reply #1 on: November 30, 2010, 06:32:04 pm »
 Well, I think you did a darn good job. Anybody would be proud to carry that knife. Your file work looks great. You can get a better polish by just stepping up with finer grade sandpaper. You can finish up with 1200 or 1400 grit emory cloth.
« Last Edit: November 30, 2010, 09:08:00 pm by mullet »
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sailordad

  • Member
  • Posts: 5,045
Re: Latest Knife
« Reply #2 on: November 30, 2010, 07:42:49 pm »
dang i realy like that file work
beautiful work
i take a belt sander belt and flip it inside out and put it back on the sander and run the blade on that
i learned that from someone on here,works nice easier than hand sanding
but i have never gotten them as shiny as hand sanding either
but i dont care as long as they no longer look like saw blades  ;D
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline bryan irwin

  • Member
  • Posts: 671
Re: Latest Knife
« Reply #3 on: November 30, 2010, 08:50:47 pm »
nice knife i polish mine with die grinder with scothbright pad.
Logged
bryan irwin

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Latest Knife
« Reply #4 on: November 30, 2010, 08:56:14 pm »
Super nice knife. Would make an excellent Christmas present. ;)
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: Latest Knife
« Reply #5 on: November 30, 2010, 09:46:06 pm »
That is a fine looking knife. Good craftsmanship.  '  Frank
Logged
Frank (The Sparrow) Pataha, Washington

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Latest Knife
« Reply #6 on: December 01, 2010, 06:15:02 am »
Great looking knife,sweet. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: Latest Knife
« Reply #7 on: December 01, 2010, 09:01:35 am »
Nice job!
Logged
Jeff Utley- Atlanta GA

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Latest Knife
« Reply #8 on: December 01, 2010, 09:05:01 am »
Very nice, especially like the vine work!
Logged
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Re: Latest Knife
« Reply #9 on: December 01, 2010, 10:35:40 am »
Thanks a lot guys. I've found that when I take my time on my projects, I'm a lot happier about how they turn out. Go figure.  ;)

Oh, Eddie, my dad just so happened to be making a trip to Home Depot last night, and so it is now polished with fine sandpaper. Looks better, thanks.
I'll have to try some of those other methods y'all suggested. Thanks for those, too. :)
       Sean
Logged
Dallas/Fort Worth Tx.

Offline HoBow

  • Member
  • Posts: 1,439
  • The choices we make dictate the lives we lead.
Re: Latest Knife
« Reply #10 on: December 01, 2010, 11:11:22 am »
Which files did you use?  I've never attempted file work, but this provides motivation.
Logged
Jeff Utley- Atlanta GA

Offline jeff halfrack

  • Member
  • Posts: 116
Re: Latest Knife
« Reply #11 on: December 01, 2010, 01:09:12 pm »
  NOW  buddy   that  just  stopped  me  in  my  tracks!!!!!!  that  is  just  the  way  I  like  them    I wish you would  do a  build-along thanks  JEFFW
Logged

Offline ohma

  • Member
  • Posts: 279
Re: Latest Knife
« Reply #12 on: December 07, 2010, 03:26:36 pm »
i use valve lapping compound. buy it at auto parts store.comes in a tube its cheap and just put it on a cotton buffing wheel.it will polish out to what ever finish you desire. beautifull knife, that deserves a mirror finish.
Logged
if your not dead you are getting older so get out and shoot some arrows.

Offline sulphur

  • Member
  • Posts: 321
Re: Latest Knife
« Reply #13 on: December 08, 2010, 07:37:49 pm »
very cool,  simple blade with great accents with the spine design.   i've made a few knives from old files but nothing that good.  my wife said my first one looked like a steak knife.  i bought some simple steel sheets from lowe's to practice.  not great steel but it'll be ok till im better.
Logged
Pages: [1]
« previous next »