Author Topic: nocking point  (Read 7609 times)

0 Members and 1 Guest are viewing this topic.

Offline billmac

  • Member
  • Posts: 82
nocking point
« on: May 01, 2007, 10:09:20 am »
I know that a crimp-on string nock is not terribly primitive, but with a dacron string that horse has already left the barn.  I'm planning to try shooting 3-under.  I assume that means the nock should go over the arrow?

Dale

  • Guest
Re: nocking point
« Reply #1 on: May 01, 2007, 10:33:08 am »
Yes.  Don't sweat the dacron string and crimp nock.  I do the same thing.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: nocking point
« Reply #2 on: May 01, 2007, 06:58:36 pm »
  A crimp-on nock point! Oh my! :o If you want to be primitive you could use dental floss built up with super glue. ;)
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: nocking point
« Reply #3 on: May 01, 2007, 09:26:12 pm »
I also use a dacron string and metal crimp-on nock point on most of my bows. After crimping it with the little fancy nock pliers, I whack it a couple times between two rocks to make it more primitive :)
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: nocking point
« Reply #4 on: May 01, 2007, 09:26:58 pm »
 :D :D :D............bob

Offline venisonburger

  • Member
  • Posts: 1,042
Re: nocking point
« Reply #5 on: May 01, 2007, 10:02:18 pm »
lol, mullet, I can picture primitive people with a pack of cinnamon dental floss cleaning out their teeth after eating a buffalo. Haaaa!
Sorry, I got carried away.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: nocking point
« Reply #6 on: May 01, 2007, 10:45:20 pm »
   Uhh.. you did mean floss from buffalo sinew ?
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: nocking point
« Reply #7 on: May 02, 2007, 01:02:54 am »
I use Dacron strings and brass clamp on nock point. I do try to remove any burs in the brass with a file after clamping. On some bows I don't use a nock point. Just go by feel.   Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline markinengland

  • Member
  • Posts: 698
Re: nocking point
« Reply #8 on: May 02, 2007, 06:31:58 pm »
Billmac,
Even if using three fingers under the arrow can go nder the nock point if the position of the nock point is correct. This works well as the arrow is supported by the bow hand knuckle and exerts upward pressure against the nocking point keeping it in place.
In my opinion whether the string is dacron or not doesn't matter. Once the string is stretched in and fts well with correct brace height then you can use any nock point you want. I know a very good archer who scores very well without any nock point at all!

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: nocking point
« Reply #9 on: May 11, 2007, 12:51:01 am »
I quit using the brass nocking point because it was chewing up my glove.  I use a piece of dacron wrapped around the string, or duct tape.  ;D Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: nocking point
« Reply #10 on: May 11, 2007, 06:25:06 am »
Just use primitive dental floss ;D
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: nocking point
« Reply #11 on: May 11, 2007, 02:26:36 pm »
Pat, you could always camoflage that brass nocking point with some sinew...although I guess the "brass age" was somewhat a primitive timeframe after all! ;D
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: nocking point
« Reply #12 on: May 11, 2007, 02:35:54 pm »
...and since Outzi, 3000 years earlier that they origionally thought. ;)    Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC